LBB1938/20 (EOL)

Bosch LBB 1938/20 Plena Power Amplifier, 480 W power amplifier in a 3U high 19”case for rack mounting or tabletop use, Line inputs : 2x, Loudspeaker outputs : 3x, Loudspeaker direct output : 100 V/ 70 V (8 ohm), Frequency response 50 Hz to 20 kHz (+1 / ‑3 dB at ‑10 dB ref. rated output), Distortion <1% at rated output power, 1 kHz.

Power Amplifier

Bosch LBB1938/20 480W Plena Power Amplifier

Performance

Frequency response 50 Hz to 20 kHz (+1 / -3 dB at -10 dB ref. rated output)

Distortion <1% at rated output power, 1 kHz

Loudspeaker Output

The amplifier has 70 V and 100 V outputs for constant voltage loudspeaker systems and a low impedance output for 8 ohm loudspeaker loads.

Priority Controlled Output

The LBB 1938/20 has two separate priority controlled 100 V outputs for zones that only need announcements made via the priority input, and for zones that will not get any announcements made via the priority input.

Line Inputs

Dual inputs with priority switching

Line Loop-through

The system has two balanced inputs with priority control, each with a loop-through facility. This makes it easy to connect remote systems that require priority control. 

Controls and Indicators

Overheat indicator, Air inlet for forced air cooling, Battery operation indicator

Overheat indicator, Level control input 1 & 2, Power button, Mains switch

Protection

The amplifier is protected against overload and short circuits. A temperature-controlled fan ensures high reliability at high output levels and low acoustic noise at lower output levels.

Electrical

Mains Power Supply

­Voltage

230 VAC ±10%, 50/60 Hz

Inrush current

19 A

Max power consumption

2200 VA

Battery Power Supply

Voltage

24 VDC +15% / -15%

Current max

30 A

Performance

Output power (rms/maximum)

480 / 720 W

Power reduction on backup power

-1 dB

Frequency response

50 Hz to 20 kHz (+1 / -3 dB at -10 dB ref. rated output)

Distortion

<1% at rated output power, 1 kHz

S/N (flat at max volume)

>90 dB

Line inputs

2 x

Connector

3-pin XLR, balanced

Sensitivity

1 V

Impedance

20 kohm

CMRR

>25 dB (50 Hz to 20 kHz)

Gain

40 dB

100 V Input

Connector

Screw, unbalanced

Sensitivity

100 V

Impedance

330 kohm

Line loop-through output

2 x

Connector

3-pin XLR

Nominal level

1 V

Impedance

Direct connection to line input

Loudspeaker Outputs

3 x

Connector

Screw, floating

Direct output

100 V, 70 V, 8 ohm

Priority only (from input 1)

100 V or 70 V internally selectable

Music (non-priority) only

100 V or 70 V internally selectable

Power Consumption

Mains operation

Max power

990 W

-3dB

715 W

-6dB

510 W

Pilot tone

110 W

Idle

125 W

24 VDC operation

Max power

32 A (770 W)

-3 dB

26 A (625 W)

-6 dB

18 A (430 W)

Pilot tone*

3.8 A (91 W )

Idle

0.7 A (17 W)

Mechanical

Dimensions (H x W x D)

145 x 430 x 370 mm (19" wide, 3U high, with feet)

Weight

Approx. 25 kg

Mounting

Standalone, 19”rack

Color

Charcoal

Environmental

Operating temperature

-10 ºC to +55 ºC (14 ºF to +131 ºF)

Storage temperature

-40 ºC to +70 ºC (-40 ºF to +158 ºF)

Relative humidity

<95%

Acoustic noise level of fan

<48 dB SPL at 1 m (max output)

 Recently viewed Products

To install this Web App in your iOS device press and then Add to Home Screen.