iDS-2CD7A86G0-IZHSY 2.8-12mm

Camera

Image Sensor

1/1.8" Progressive Scan CMOS

Max. Resolution

3840 × 2160

Min. Illumination

Color: 0.002 Lux @ (F1.2, AGC ON); B/W: 0.0002 Lux @ (F1.2, AGC ON), 0 Lux with IR

Shutter Time

1 s to 1/100,000 s

Day & Night

IR cut filter

Blue glass module to reduce ghost phenomenon

Lens

Focal Length & FOV

2.8 to 12 mm, horizontal FOV: 112.3° to 41.2°, vertical FOV: 58° to 23.1°, diagonal FOV: 137.3° to 47.3°

Focus

Auto, semi-auto, manual

Iris Type

P-iris

Aperture

2.8 to 12 mm: F1.2 to F2.5

DORI

DORI

Wide:

2.8 to 12 mm: D: 87 m, O: 34.5 m, R: 17.4 m, I: 8.7 m

Tele:

2.8 to 12 mm: D: 216 m, O: 85.7 m, R: 43.2 m, I: 21.6 m

Illuminator

Supplement Light Type

IR

Supplement Light Range

2.8 to 12 mm: 50 m

Smart Supplement Light

Yes

IR Wavelength

850 nm

Video

Main Stream

50 Hz: 25 fps (3840 × 2160, 3072 × 1728, 2560 × 1440, 1920 × 1080, 1280× 720)

60 Hz: 30 fps (3840 × 2160, 3072 × 1728, 2560 × 1440, 1920 × 1080, 1280× 720)

Sub-Stream

50 Hz: 25 fps (704 × 480, 640 × 480)

60 Hz: 30 fps (704 × 480, 640 × 480)

Third Stream

50 Hz: 25 fps (1920 × 1080, 1280 × 720, 704 × 480, 640 × 480)

60 Hz: 30 fps (1920 × 1080, 1280 × 720, 704 × 480, 640 × 480)

Fourth Stream

50 Hz: 25 fps (704 × 480, 640 × 480)

60 Hz: 30 fps (704 × 480, 640 × 480)

Fifth Stream

50 Hz: 25 fps (704 × 480, 640 × 480)

60 Hz: 30 fps (704 × 480, 640 × 480)

Video Compression

Main stream: H.265+ / H.265 / H.264+ / H.264,

Sub-stream: H.265 / H.264 / MJPEG,

Third stream: H.265 / H.264,

Fourth stream: H.265 / H.264 / MJPEG,

Fifth stream: H.265 / H.264 / MJPEG

Video Bit Rate

32 Kbps to 16 Mbps

H.264 Type

Main Profile

H.265 Type

Baseline Profile, Main Profile, High Profile

Bit Rate Control

CBR, VBR

Scalable Video Coding (SVC)

H.264 and H.265 encoding

Region of Interest (ROI)

4 fixed region(s) for each stream

Target Cropping

Yes

Network

Protocols

TCP/IP, ICMP, HTTP, HTTPS, FTP, SFTP, SRTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP,UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, UDP, Bonjour, SSL/TLS

Security

Password protection, complicated password, HTTPS encryption, 802.1X authentication (EAP-TLS, EAP-LEAP, EAP-MD5), watermark, IP address filter, basic and digest authentication for HTTP/HTTPS, WSSE and digest authentication for Open Network Video Interface, RTP/RTSP OVER HTTPS, Control Timeout Settings, Security Audit Log, TLS 1.2

Network Storage

NAS (NFS, SMB/CIFS), auto network replenishment (ANR)

Together with high-end Hikvision memory card, memory card encryption and health detection are supported.

Image

Image Parameters Switch

Yes

Image Settings

Saturation, brightness, contrast, sharpness, white balance, and AGC adjustable by client software or web browser

Day/Night Switch

Day, Night, Auto, Schedule, Alarm Trigger

Wide Dynamic Range (WDR)

120 dB

SNR

≥ 52 dB

Image Enhancement

BLC, HLC, Defog, 3D DNR

Privacy Mask

8 programmable polygon privacy masks, mask color or mosaic configurable

Image Stabilization

EIS

Picture Overlay

LOGO picture can be overlaid on video with 128 × 128 24bit bmp format

Interface

Video Output

1 Vp-p Composite Output (75 Ω/CVBS) (Only for debugging)

Ethernet Interface

1 RJ45 10 M/100 M/1000 M self-adaptive Ethernet port

On-Board Storage

Built-in memory card slot, support microSD / microSDHC / microSDXC card, up to 1 TB

Audio

With -Y: 1 input (line in), 1 output (line out), 3.5 mm connector

Alarm

2 input, 2 outputs (max. 24 VDC, 1 A)

RS-485

With -Y: 1 RS-485 (half duplex, HIKVISION, Pelco-P, Pelco-D, self-adaptive)

Reset Key

Yes

Power Output

With -Y: 12 VDC, max. 100 mA

Event

Basic Event

Motion detection, video tampering alarm, exception (network disconnected, IP address conflict, illegal login, abnormal reboot, HDD full, HDD error), video quality diagnosis, vibration detection

Smart Event

Line crossing detection, intrusion detection, region entrance detection, region exiting detection, audio exception detection, scene change detection, defocus detection

Linkage

Upload to FTP / NAS / memory card, notify surveillance center, send email, trigger alarm output, trigger recording, trigger capture, audible warning

Deep Learning Function

Multi-target-type Detection

Supports simultaneous detection and capture of human body, face and vehicle

Gets 7 face features, 13 human body features and 2 vehicle features

Face Capture

Detects up to 60 faces simultaneously

Supports swing left and right from -60° to 60°, tilt up and down from -30° to 30°

Uploads face with background and closed-up face pictures

Face Comparison

Up to 10 face libraries. Up to 30,000 faces for each library. 150,000 faces in total.

Supports face library encryption

Perimeter Protection

Line crossing, intrusion, region entrance, region exiting

Support alarm triggering by specified target types (human and vehicle)

People Counting

Supports crossline people counting,

Supports counting, displaying and exporting the people flow data of entering and exiting. (The data is stored in the flash.),

The real-time people flow data is displayed on the screen,

Supports swing left and right from -60° to 60°, tilt up and down from -30° to 30°., Uploads face with background and closed-up face picture.,

Supports real-time uploading and uploading by statistic cycle

Queue Management

Supports up to 8 detection regions, and independent arming schedule and linkage method

Supports 2 detection modes: regional people queuing-up, waiting time detection Generates reports to compare the efficiency of different queuing-ups and display the changing status of one queue

Supports raw data export for further analysis.

Supports real-time data uploading and scheduled data uploading

Regional people queuing-up: supports 4 alarm trigger conditions, including greater than threshold, less than threshold, equal to threshold, not equal to threshold Waiting time detection: supports 1 alarm trigger condition, including greater than threshold

Heat Map

A graphic description of visits (by calculating amount of people or amount of dwell time) in a configured area.,

Two report types are available, space heat map and time heat map line chart.

Hard Hat Detection

Detects up to 30 human targets simultaneously

Supports up to 4 shield regions

Metadata

Intrusion detection, line crossing detection, region entrance detection, region exiting detection, face capture, multi-target-type detection

Regional People Counting

Supports up to 8 detection regions, and independent arming schedule and linkage method

Supports 3 detection modes: people density detection, number of people exception detection, waiting time exception detection

Supports parameter settings: alarm times per exception, alarm interval, first alarm delay

Supports searching real-time number of people

People density detection: supports scheduled uploading, number of people change uploading, congestion level uploading

Number of people exception detection: supports 6 alarm trigger conditions, including greater than threshold A, less than threshold A, equal to threshold A, not equal to threshold A, greater than threshold A and less than threshold B, less than threshold A or greater than threshold B (threshold A should be less than threshold B)

Waiting time exception detection: supports 3 alarm trigger conditions, including greater than threshold A, less than threshold A, greater than threshold A and less than threshold B (threshold A should be less than threshold B)

On/Off Duty Detection

Supports up to 8 detection regions, and independent arming schedule and linkage method

Supports 2 detection modes: absence detection, on/off duty detection

Supports parameter settings: person on duty, absence duration

General

Power

12 VDC ± 20%, 1.19 A, max. 14.28 W, three-core terminal block

PoE: 802.3at, Type 2, Class 4, 42.5 V to 57 V), 0.396 A to 0. 295 A, max. 16.8 W

Material

Aluminum alloy body

Dimension

Without -Y: Ø144 × 347 mm (Ø5.7″ × 13.7″)

With -Y: Ø140 × 351 mm (Ø5.5″ × 13.8″)

Package Dimension

405 × 190 × 180 mm (15.9″ × 7.5″ × 7.1″)

Weight

Approx. 1950 g (4.2 lb.)

With Package Weight

Approx. 3070 g (6.7 lb.)

Storage Conditions

-30 °C to 60 °C (-22 °F to 140 °F). Humidity 95% or less (non-condensing)

Startup and Operating

Conditions

-40 °C to 60 °C (-40 °F to 140 °F). Humidity 95% or less (non-condensing)

Approval

EMC

FCC (47 CFR Part 15, Subpart B);

CE-EMC (EN 55032: 2015, EN 61000-3-2:2019, EEN 61000-3-3:2013+A1:2019, EN

50130-4: 2011+A1: 2014);

RCM (AS/NZS CISPR 32: 2015); IC (ICES-003: Issue 7);

KC (KN 32: 2015, KN 35: 2015)

Safety

UL (UL 62368-1);

CB (IEC 62368-1:2014+A11);

CE-LVD (EN 62368-1:2014/A11:2017);

BIS (IS 13252(Part 1):2010/ IEC 60950-1 : 2005); LOA (IEC/EN 60950-1)

Environment

CE-RoHS (2011/65/EU); WEEE (2012/19/EU);

Reach (Regulation (EC) No 1907/2006)

Protection

IK10 (IEC 62262:2002), IP67 (IEC 60529-2013)

Anti-Corrosion Protection

With -Y: NEMA 4X(NEMA 250-2018)

Automotive and Railway

EN50121-4

Other

PVC FREE