Hikvision DS-K1T808MFWX-B: fingerprint access terminal for offices and small factories. Unlocks by fingerprint, Mifare card and PIN. Stores 3,000 fingerprints, 3,000 cards and 100,000 events. Built-in door controller.

Fingerprint access terminal with a keypad: open the door by fingerprint, Mifare card or PIN, with 3,000 users and 100,000 events in memory. Connects by network cable or USB, runs on 12 VDC. Scroll down for details.

Visitor terminal for a reception desk: visitors are enrolled on the screen, no paper register, and the terminal keeps up to 150,000 visitor records. Works on its own or on the network over cable or Wi-Fi. Scroll down for details.

Dual-screen visitor terminal for busy receptions: the visitor signs in on the 10.1-inch screen while the operator works on the 15.6-inch one. Scans the passport, prints a ticket and issues a QR code or Mifare card pass for the turnstile. 300,000 records, cable or Wi-Fi. Scroll down for details.

4-door access controller for offices, factories and buildings: connects up to 12 card readers (RS-485, Wiegand or OSDP), 4 locks, 4 door sensors and 4 exit buttons, and stores 100,000 cards and 300,000 events. Advanced rules like anti-passback, interlock and multiple authentication, full door alarms, encrypted TCP/IP, and it keeps working offline. Built-in 100-240 VAC power in a metal case with backup battery support. Scroll down for details.

2-door card access controller (Value Series) that stores 10,000 cards and 50,000 events, so each door keeps working on its own. Connect Wiegand card readers, locks and exit buttons, use the alarm input and output, and manage it over the TCP/IP network. Scroll down for details.

Access controller for 4 doors with Wiegand card readers: 4 lock relays, 4 exit buttons and door sensors, 4 alarm outputs, and 10,000 cards in memory. Managed over the network. Scroll down for details.

EM card reader with keypad for a Hikvision access controller: card plus PIN, or card only. Connects by RS-485 or Wiegand, IP64. Scroll down for details.

Slim card and PIN reader that fits on a door frame: staff tap a Mifare card, or card plus PIN on a secure door. Talks RS-485, Wiegand or OSDP, so it works with Hikvision controllers and most others. IP65 for an outside door. Scroll down for details.

Fingerprint reader for sites on EM cards: same reader as the DS-K1201AMF but reads the cheap 125 kHz EM cards most offices already have. RS-485 to a Hikvision access controller, 5000 fingerprints, decision in under a second, -40 to 70 °C. Scroll down for details.

Fingerprint reader for the door: wires by RS-485 to a Hikvision access controller (DS-K2600 series) and opens the door on a fingerprint, a Mifare card, or both for a secure room. 5000 fingerprints, decision in under a second, works at -40 to 70 °C so it survives a Pakistani summer on an outside wall. Scroll down for details.

EM card reader for a Hikvision access controller: show the card to open. Connects by RS-485 or Wiegand, IP64. Scroll down for details.

EM card reader with keypad for a Hikvision access controller: card plus PIN, or card only. Connects by RS-485 or Wiegand, IP64. Scroll down for details.

Mifare card reader for a Hikvision access controller: show the card to open. Connects by RS-485 or Wiegand, IP64. Scroll down for details.

Mifare card reader for a Hikvision access controller: show the card to open. Connects by RS-485 or Wiegand, IP65, IK10. Scroll down for details.

Mifare card reader with keypad for a Hikvision access controller: card plus PIN, or card only. Connects by RS-485 or Wiegand, IP65, IK10. Scroll down for details.

Mifare card reader with keypad for a Hikvision access controller: card plus PIN, or card only. Connects by RS-485 or Wiegand, IP65. Scroll down for details.

EM card reader with keypad for a Hikvision access controller: card plus PIN, or card only. Connects by RS-485 or Wiegand, IP65. Scroll down for details.

Mifare card reader for a Hikvision access controller: show the card to open. Connects by RS-485 or Wiegand, IP65. Scroll down for details.

EM card reader with keypad for a Hikvision access controller: card plus PIN, or card only. Connects by RS-485 or Wiegand, IP65. Scroll down for details.