Smart PoE Switch
Hikvision DS-3E1105P-EI/M 4 Port Fast Ethernet Smart POE Switch
Ports
4 × 10/100 Mbps PoE port,1 × 10/100 Mbps RJ45 port
PoE Standard
IEEE 802.3af,IEEE 802.3at
PoE Power Budget
Total PoE Power Budget 45W
Network Parameters
MAC Add. Table: 2K, Switching Capacity: 1.2 Gbps, Packet Forwarding Rate: 0.89Mpps
Software Function
Support 802.1Q VLAN, Support PoE watchdog, STP/RSTP Loop prevention
|
General |
|
|
|
Shell |
Metal material, fan-free design |
|
|
Net Weight |
0.26 kg (0.573 lb) |
|
|
Gross Weight |
0.75 kg (1.65 lb) |
|
|
Dimensions (W × H × D) |
121.1 mm × 27.6 mm × 83.1 mm (4.77'' × 1.09'' × 3.27'') |
|
|
Operating Temperature |
0 °C to 40 °C (32 °F to 104 °F) |
|
|
Storage Temperature |
-40 °C to 85 °C (-40 °F to 185 °F) |
|
|
Operating Humidity |
5% to 95% (no condensation) |
|
|
Relative Humidity |
5% to 95% (no condensation) |
|
|
Power Supply |
54 V DC, 0.92 A |
|
|
Installation Mode |
Desk-Mounted, Wall-Mounted |
|
|
Max. Power Consumption |
50 W |
|
|
Power Consumption in Idle |
5 W |
|
|
Surge Protection |
6 kV |
|
|
Network Parameters |
|
|
|
Ports |
4 × 10/100 Mbps PoE port,1 × 10/100 Mbps RJ45 port |
|
|
MAC Address Table |
2 K |
|
|
Switching Capacity |
1.2 Gbps |
|
|
Packet Forwarding Rate |
0.89 Mpps |
|
|
Internal Cache |
768 Kbits |
|
|
PoE Power Supply |
|
|
|
PoE Standard |
IEEE 802.3af, IEEE 802.3at |
|
|
PoE Power Pin |
8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-) |
|
|
PoE Port |
PoE: Ports 1 to 4 |
|
|
Max. Port Power |
30 W |
|
|
PoE Power Budget |
45 W |
|
|
Software Function |
|
|
|
Port Isolation |
Ports 1 to 4: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group. |
|
|
PoE Watchdog |
Ports 1 to 4: auto detect and restart the cameras that do not respond. |
|
|
Link Aggregation |
Link
aggregation is used to aggregate multiple physical ports to form a logical
port for load balancing, bandwidth expansion, and port protection. |
|
|
Loop Prevention |
Loop
prevention is used to prevent the switching network from forming loops, which
will seriously affect network communication. Disabled by default. |
|
|
VLAN |
VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 32 VLAN. |
|
|
Long Range |
Ports 1 to 4: up to 300 m. Long range performance may vary depend on camera model or cable condition. |
|
|
HPP |
Support one-click activation and remote management via Hik-Partner Pro. Functions supported: Display the port rate. Display the port bandwidth utilization rate. Display the PoE power usage. Display topology information. Display the alarm status. Restart ports and devices. Enable port long-rage mode. Remotely upgrade the device. |
|
|
System Maintenance |
Support remote management via Hik-Partner Pro. |
|
|
VIP Port |
Ports 1 to 2: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient. |
|
|
Approval |
||
|
EMC |
CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020) |
|
|
Safety |
CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017) |
|
|
Chemistry |
CE-RoHS (2011/65/EU), WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006) |
|