DS-3E1510P-SI-8P2F
8-Port Gigabit Smart PoE Switch, 110 W
- 8 Gigabit PoE ports, 110 W budget
- 2 SFP fiber uplinks
- VLAN, ERPS ring, storm control
- Energy saving on a schedule
DS-3E1510P-SI-8P2F
8-Port Gigabit Smart PoE Switch, 110 W
- 8 Gigabit PoE ports, 110 W budget
- 2 SFP fiber uplinks
- VLAN, ERPS ring, storm control
- Energy saving on a schedule
Key specs
- 8 × 10/100/1000 Mbps PoE RJ45 ports
- 2 × 100/1000 Mbps SFP fiber ports
- Total PoE budget 110 W
- IEEE 802.1Q VLAN
- STP/RSTP/ERPS loop prevention, storm control
- SNMP, QoS, DHCP snooping, ARP anti-spoofing
- Energy saving mode with your own schedule
- Cable detection to find faults
- 6 kV surge protection
Know before you buy
Quick answers about the DS-3E1510P-SI-8P2F, and how it compares.
How many cameras can this PoE switch power?
Two limits apply: the number of PoE ports, and the total PoE budget in watts. Add up the maximum power of each camera from its datasheet and keep about 20% spare. Example: 16 cameras at 6 W each need 96 W, plus 20% is about 115 W, so a switch with a 125 W budget or more is right. A PoE port (802.3af) gives up to 15.4 W and a PoE+ port (802.3at) up to 30 W. PTZ cameras and cameras with heaters, strong IR or strobe lights need PoE+ or Hi-PoE (802.3bt). Not sure? Send us your camera list and we size it for you.
Unmanaged, smart or managed switch: which one do I need?
Unmanaged switches are plug and play, with nothing to set up: good for small systems. Smart (web managed) switches add a web page and app view for VLANs, port status, cable checks and, on many models, PoE watchdog, so you can find and fix problems from your desk. Managed (Layer 2+ or Layer 3) switches add full control, routing and ring protection for large sites, campuses and city projects. For most CCTV jobs with 8 to 48 cameras, a smart PoE switch is the best value. Ask us if you are not sure.
What are the SFP fiber ports for?
SFP and SFP+ ports take a small plug-in fiber module, sold separately. Use them to link the switch to the NVR room or main switch when the distance is over 100 m (330 ft), or between buildings. Fiber carries no electricity, so it also stops surges travelling between buildings. Choose single-mode or multi-mode modules to match your fiber cable, and use a matching pair of modules at the two ends. Ask us for the right modules and cable.