DS-3T0506HP
4-Port Industrial Hi-PoE Switch, DIN Rail
- 4 Gigabit PoE ports, 2 SFP fiber
- Hi-PoE up to 90 W on port 1
- -40 °C to 75 °C, DIN rail
- 6 kV surge protection
DS-3T0506HP
4-Port Industrial Hi-PoE Switch, DIN Rail
- 4 Gigabit PoE ports, 2 SFP fiber
- Hi-PoE up to 90 W on port 1
- -40 °C to 75 °C, DIN rail
- 6 kV surge protection
Key specs
- 4 × Gigabit PoE RJ45 ports
- 2 × Gigabit SFP fiber ports
- Hi-PoE up to 90 W on port 1
- IEEE 802.3af/at/bt
- Industrial switch, unmanaged, DIN rail mount
- PD power detection with system-level overload protection
- 6 kV surge protection
- -40 °C to 75 °C (-40 °F to 167 °F)
Know before you buy
Quick answers about the DS-3T0506HP, and how it compares.
When do I need an industrial switch?
Industrial switches are made for outdoor cabinets, poles, factories and rooftops. They have no fan, a strong metal housing, and work from -40 °C to 75 °C (-40 °F to 167 °F), where a normal office switch can fail in a Pakistani summer. Use one in a field cabinet near the cameras and link it back to the control room.
What is Hi-PoE (802.3bt)?
Hi-PoE (IEEE 802.3bt) sends much more power on one network cable than normal PoE: up to 90 W on a port of this switch, compared with 30 W for PoE+. Use it for PTZ cameras, cameras with heaters or strong IR, and other high-power devices, so you do not need a separate power supply at the camera. The total PoE budget of the switch still applies.
How many cameras can this PoE switch power?
Two limits apply: the number of PoE ports, and the total PoE budget in watts. Add up the maximum power of each camera from its datasheet and keep about 20% spare. Example: 16 cameras at 6 W each need 96 W, plus 20% is about 115 W, so a switch with a 125 W budget or more is right. A PoE port (802.3af) gives up to 15.4 W and a PoE+ port (802.3at) up to 30 W. PTZ cameras and cameras with heaters, strong IR or strobe lights need PoE+ or Hi-PoE (802.3bt). Not sure? Send us your camera list and we size it for you.
What are the SFP fiber ports for?
SFP and SFP+ ports take a small plug-in fiber module, sold separately. Use them to link the switch to the NVR room or main switch when the distance is over 100 m (330 ft), or between buildings. Fiber carries no electricity, so it also stops surges travelling between buildings. Choose single-mode or multi-mode modules to match your fiber cable, and use a matching pair of modules at the two ends. Ask us for the right modules and cable.