DS-TME200-D
Entrance & Exit Controller, 4 Lanes
- Manages 4 lanes, up to 4 barriers
- 50,000 cards and 50,000 records
- 4 Wiegand reader inputs
- Works online and offline
DS-TME200-D
Entrance & Exit Controller, 4 Lanes
- Manages 4 lanes, up to 4 barriers
- 50,000 cards and 50,000 records
- 4 Wiegand reader inputs
- Works online and offline
Key specs
- Entrance and exit control for 4 lanes
- 4 alarm outputs to control up to 4 barrier gates
- 4 Wiegand reader inputs (W26/W34), third-party readers supported
- 50,000 cards and 50,000 card records; normal, blocklist and registered cards
- TCP/IP with encrypted data
- Online and offline operation
- Time sync by NTP, manual or automatic
Know before you buy
Quick answers about the DS-TME200-D, and how it compares.
How does UHF vehicle access work?
A UHF sticker tag goes on the inside of the car windscreen. A UHF reader at the gate reads it from several metres away as the car comes in, and the entrance and exit controller checks the tag against the allowed list and opens the barrier. Residents and staff drive in without stopping, swiping a card or opening the window. Ask us to plan your gate.
Which barrier gate speed and boom length do I need?
Choose by lane width and traffic. The 520 series comes in three versions: -H with a 3 m boom that opens in about 0.9 s, for busy entrances; -M with a 4 m boom, about 1.5 s; and -L with a 5 to 6 m boom, about 4 s, for wide lanes. For safety add an anti-fall radar or loop so the boom never comes down on a car, and use ANPR cameras or UHF readers to open it automatically. Ask us to plan your gate.