Smoke Alarm
Hikfire HF-S2 Smoke Alarm
Buzzer
Built-in buzzer with a powerful alarm with sound levels ≥ 85 dB @ 3 meters
Battery Powered
3 years (AA× 2 alkaline battery), easy to replace
Certified Safety:
Compliant with the European EN-14604 standard
Key specs
- Standalone photoelectric smoke alarm: no wiring, no panel, screw it to the ceiling
- Alarm ≥85 dB at 3 m (10 ft) for the first minute, ≥82 dB after
- 2 x AA batteries (2900 mAh), about 3 years, easy to replace; standby under 4 µA
- Low battery alarm and maze dirty (dusty chamber) alarm; self-check button; local silence and reset
- 1 IO alarm output to link a siren, a panel or a Hikvision alarm input
- EN 14604:2005; 3 VDC; -10 to 55 °C (14 to 131 °F); Φ 160 x 50 mm; 161 g
Know before you buy
Quick answers about the HF-S2, and how it compares.
Standalone, interlinked or panel: which smoke alarm do I need?
A standalone alarm (HF-S2, HF-S3E) sounds only where the smoke is; fine for a shop, a store room or one flat. Interlinked alarms (HF-S3E-R) talk to each other by radio, so a fire in the kitchen wakes the bedrooms upstairs; right for a house, hostel or guest house, with no wiring. A building with many rooms, a basement or an escape route that must be managed needs a fire alarm panel with wired detectors, which the fire code usually asks for; Ask us and we design it. The Hikfire cameras add early warning to any of these but do not replace the panel.
Can I buy this online?
Hikvision security products are installed products, so we start with a free pre-sales consultation: our engineers suggest the right model and everything that goes with it for your site and send a quote. Use Request a Quote on this page, contact us or WhatsApp +92 300 ESCO 301. Offices in Karachi, Lahore, Islamabad and Rawalpindi. 1 year carry-in warranty.
How is a fire detection camera different from a smoke detector?
A smoke detector waits for smoke to reach the ceiling. A fire detection camera watches the area: the HF-VH series senses the temperature of what it sees and alarms when something gets too hot, and the HF-VT fusion models also see a flame at a distance and smoke in the picture, so the alarm comes earlier and the operator can check it on video. It is an extra layer for a kitchen, warehouse, substation or store room, not a replacement for the fire alarm system the building code asks for.