HF-S3E-R Interlink Smoke Detector
Detects smoke in the early stages of a fire to help prevent hazards.
Audible & Visual Alarms
Provides loud and clear warnings through an 85dB sound alarm and flashing light indicators.
Dual Light Sensing Technology:
Minimizes false alarms caused by water vapor, ensuring more accurate smoke detection.
Long-Life Lithium Battery:
Powered by a lithium battery with a theoretical service life of up to 10 years.
Self-Test Function
User can check the device working status by self-test button.
Failure Alert System
Notifies users of issues like low battery or sensor malfunctions (e.g., maze fault alarm).
Interlinking
Allows interconnection with up to 30 devices for synchronized alarms throughout a building.
Remote Control Compatibility
Supports wireless IR remote controllers for convenient alarm silencing.
Key specs
- HikFire-Link interlinked smoke alarm: when one alarm sees smoke, every linked alarm in the house sounds
- Wireless interconnection at 433 MHz, up to 1000 m between alarms in open space; wireless remote control (silence, test)
- Dual light sensing (two wavelengths) tells smoke from steam and water vapour: fewer false alarms in kitchens and bathrooms
- Audible and visual alarm ≥85 dB at 3 m (10 ft)
- CR123A lithium battery (1600 mAh), replaceable, up to 8 years; standby ≤12 µA
- Self-test button, hush, low voltage alarm, maze dirty (dusty chamber) alarm, battery-removed indicator
- EN 14604:2005, AS 3786:2023; -10 to 55 °C (14 to 131 °F); Φ 105 x 35 mm; 104 g; ceiling mounted
|
Function |
|
|
Interconnection Alarm |
Yes |
|
Hush |
Yes |
|
Maze dirty alarm |
Yes |
|
Low voltage alarm |
Yes |
|
Test |
Yes |
|
Battery uninstalled indicator |
Yes |
|
Smoke alarm |
Yes |
|
Maximum Number of Interconnected Units |
30 pcs |
|
General |
|
|
Power supply |
3 V DC, battery CR123A (replaceable) |
|
Battery capacity |
1600 mAh |
|
Standby current |
≤10 μA |
|
Execution Standard |
EN 14604: 2005 |
|
Alarm current |
≤30 mA |
|
Alarm mode |
Audible & visual alarm |
|
Alarm sound level |
≥ 85 dB@3 m (A-Weighted) |
|
Battery Life |
Ten-year battery life under normal operation |
|
Operation temperature |
-10 °C to 55 °C (14 °F to 131 °F) |
|
Operation humidity |
≤95% relative humidity (RH) |
|
Dimension (φ × H) |
105 mm × 35 mm (4.13" × 1.38") |
|
weight |
103.7 g (0.23 lb) (with battery) |
|
Installation |
Ceiling mounted |
|
Communication Mode |
Smoke Detector: HF-S3E-R: 433MHz |
Know before you buy
Quick answers about the HF-S3E-R, and how it compares.
Standalone, interlinked or panel: which smoke alarm do I need?
A standalone alarm (HF-S2, HF-S3E) sounds only where the smoke is; fine for a shop, a store room or one flat. Interlinked alarms (HF-S3E-R) talk to each other by radio, so a fire in the kitchen wakes the bedrooms upstairs; right for a house, hostel or guest house, with no wiring. A building with many rooms, a basement or an escape route that must be managed needs a fire alarm panel with wired detectors, which the fire code usually asks for; Ask us and we design it. The Hikfire cameras add early warning to any of these but do not replace the panel.
Can I buy this online?
Hikvision security products are installed products, so we start with a free pre-sales consultation: our engineers suggest the right model and everything that goes with it for your site and send a quote. Use Request a Quote on this page, contact us or WhatsApp +92 300 ESCO 301. Offices in Karachi, Lahore, Islamabad and Rawalpindi. 1 year carry-in warranty.
How is a fire detection camera different from a smoke detector?
A smoke detector waits for smoke to reach the ceiling. A fire detection camera watches the area: the HF-VH series senses the temperature of what it sees and alarms when something gets too hot, and the HF-VT fusion models also see a flame at a distance and smoke in the picture, so the alarm comes earlier and the operator can check it on video. It is an extra layer for a kitchen, warehouse, substation or store room, not a replacement for the fire alarm system the building code asks for.