DS-K2210
Elevator Master Controller, 128 Floors, TCP/IP
- Floor permissions for up to 128 floors
- 20,000 cards, 50,000 events
- 2 readers in the car, panic and fire inputs
- Expands with DS-K2M0016A, 16 floors each
DS-K2210
Elevator Master Controller, 128 Floors, TCP/IP
- Floor permissions for up to 128 floors
- 20,000 cards, 50,000 events
- 2 readers in the car, panic and fire inputs
- Expands with DS-K2M0016A, 16 floors each
Elevator Master Controller
Hikvision DS-K2210 Elevator Master Controller
Capacity
20,000 cards and 50,000 events storage
Input Interface
1 Panic Button; 1 Fire Alarm Button; 1 Maintenance Button
Output Interface
Output Interface: 5 Relay Outputs
Key specs
- Master controller for lift (elevator) access: a card or fingerprint in the car lights only the floors the person may visit
- Up to 128 floors with DS-K2M0016A sub-controllers (16 relays each, up to 8 per master); 5 relay outputs on the master
- 20,000 cards, 50,000 events; multiple authentication modes
- 2 Wiegand or 2 RS-485 readers in the car; TCP/IP and RS-485 uplink to HikCentral or iVMS-4200
- Inputs: panic button, fire alarm (releases all floors), maintenance button; 32-bit processor; watchdog; tamper
- 12 VDC ±15%; -40 to 70 °C (-40 to 158 °F); DIN rail mounting; 167 x 105 x 30 mm
|
Processor |
32 bit |
|
Communication |
TCP/IP, RS-485, and Wiegand |
|
Normal Card/Event |
20,000 Cards and 50,000 Events |
|
Indicator |
Power On: Solid Green Running Properly: Flashing Green Running Exception: Solid Red Serial Port Not Communicating: Off Serial Port Communicating: Solid Green Relay NC: Off Relay NO: Solid Green Network Disconnected: Off Network Cable Connected: Solid Yellow, Flashing Green Network Armed: Solid Yellow, Flashing Green |
|
Internal Clock |
Support |
|
Card Reader |
Up to 2 RS-485 Card Readers or 2 Wiegand Card Readers |
|
Input Interface |
1 Panic Button; 1 Fire Alarm Button; 1 Maintenance Button |
|
Output Interface |
5 Relay Outputs |
|
RTC |
Support |
|
Power Supply |
12 VDC±15% |
|
Working Temperature |
-40°F to 158°F |
|
Working Humidity |
0% to 90% (No Condensation) |
|
Dimensions |
167(L)mm * 105(W)mm * 30(H)mm |
Know before you buy
Quick answers about the DS-K2210, and how it compares.
How does lift (elevator) access control work?
A reader inside the lift car asks for a card, fingerprint or face. The DS-K2210 master controller checks the person and tells the DS-K2M0016A relay boards which floor buttons to enable, so a tenant reaches only their own floor and a visitor only the lobby. Each relay board handles 16 floors, up to 128 floors per master. The fire alarm input releases every floor. It is managed in HikCentral together with the doors, so one card works for the gate, the door and the lift. Installation needs the lift company to wire the car panel; Ask us and we coordinate it.
What does an access controller do?
The access controller is the brain at the door. Card readers, locks, exit buttons and door sensors connect to it, and it decides who may open each door and when. Cards and events are stored on the controller, so doors keep working even if the network is down. Connect it over the network to manage users and see events from one place. Ask us to design your system.
Can I buy this online?
Hikvision security products are installed products, so we start with a free pre-sales consultation: our engineers suggest the right model and everything that goes with it for your site and send a quote. Use Request a Quote on this page, contact us or WhatsApp +92 300 ESCO 301. Offices in Karachi, Lahore, Islamabad and Rawalpindi. 1 year carry-in warranty.