Key specs
- Unlock by face, fingerprint, Mifare card and Bluetooth
- 2.4 inch TFT screen, 2 MP camera
- 1,000 faces, 3,000 fingerprints, 3,000 cards, 150,000 events
- Face recognised in under 0.33 s, at 0.3 to 1.5 m
- Ethernet + Wi-Fi + PoE 802.3at + Bluetooth (gives 12 V / 1 A to the lock)
- Interfaces: lock, exit button, door contact, Wiegand
- 12 VDC 1 A or PoE 802.3at; 12 V / 1 A out for the lock; IP65
- -30 to 65 °C; 157 x 52 x 26 mm
| System | |
|---|---|
| Operating system | Linux |
| Display | |
| Screen size | 2.4-inch |
| Resolution | 240 × 320 |
| Type | TFT |
| Operation method | Non touchable |
| Video | |
| Lens | ×1 |
| Resolution | 2 MP (video stream: 540P) |
| Network | |
| Bluetooth | Support |
| Wired network | 10/100 Mbps self adaptive |
| Wi-Fi | Support |
| PoE | IEEE802.3at, standard PoE |
| Interface | |
| Network interface | 1 |
| Wiegand | 1, supports Wiegand input, single direction |
| Lock control | 1 |
| Exit button | 1 |
| Door contact input | 1 |
| TAMPER | 1 |
| Button | 1 physical call button |
| Capacity | |
| User capacity | 1000 |
| Card capacity | 3000 |
| Face capacity | 1000 |
| Fingerprint capacity | 3000 |
| Event capacity | 150000 |
| Authentication | |
| Card type | M1 card; M1 card content; CPU card No. |
| Card reading frequency | 13.56 MHz |
| Face recognition duration | < 0.33 s |
| Face recognition accuracy rate | > 99% |
| Face recognition distance | 0.3 to 1.5 m |
| General | |
| Power supply | 12 VDC, 1 A, standard PoE |
| Working temperature | -30 °C to 65 °C (-22 °F to 149 °F) |
| Working humidity | 0 % to 90 % (no condensing) |
| Dimensions | 157 mm × 52 mm × 26 mm (6.18" × 2.05" × 1.02") |
| Installation | Wall mounting |
| Protective level | IP65 |
| Function | |
| QR code recognition | Not support |
| Face anti-spoofing | Support |
| Two-way audio | Support |
| Audio prompt | Support |
| Time synchronization | Support |
Know before you buy
Quick answers about the DS-K1T323MBFWX-E1, and how it compares.
Does it work without a PC or internet?
Yes. The door controller is built in. Once people are enrolled, it opens the door on its own, and it keeps the last 150,000 events in memory. Hikvision HikCentral or the free iVMS-4200 client are optional, for several doors and attendance reports.
Which cards does it read?
Mifare 1 card (13.56 MHz). EM (125 kHz) cards carry only an ID number; Mifare (13.56 MHz) cards can hold data and are harder to copy. Choose the version that matches the cards your site already uses.
How many people can it store?
1,000 faces, 3,000 fingerprints, 3,000 cards and 150,000 events. Each person can have a face, fingerprints and a card.
Can it do time attendance?
Yes. It records every check-in as an event, and HikCentral or the free iVMS-4200 client turns the events into attendance reports.
What do I need to connect a door?
A PoE switch port: the terminal takes its power from it and gives 12 V / 1 A to the lock, so no separate power supply is needed. Then an electric lock (magnetic lock or bolt), an exit button inside and, if you want to know when the door is left open, a door contact. The terminal switches the lock itself.
Wi-Fi or network cable?
Both. Use the network cable where you can; Wi-Fi is there for doors with no cable run. It also has an AP mode, so a phone can connect to it directly for set-up.
Can I buy it online?
Access control is an installed product, so we start with a free pre-sales consultation: our engineers confirm the right terminal and accessories for your site and send a quote. Use Request a Quote on this page, contact us or WhatsApp +92 300 ESCO 301. Offices in Karachi, Lahore, Islamabad and Rawalpindi.