Skip to Content
DS-K1107AMK DS-K1107AMK Request a Quote

DS-K1107AMK

Slim card and PIN reader that fits on a door frame: staff tap a Mifare card, or card plus PIN on a secure door. Talks RS-485, Wiegand or OSDP, so it works with Hikvision controllers and most others. IP65 for an outside door. Scroll down for details.

Rs. 0 Rs. 0

  • Brand - HIKVISION
HIKVISION
HIKVISION

Comprehensive AIoT Solutions for Security, Smart Home, and Beyond

DS-K1107AMK

Mifare Card Reader with Keypad, RS-485, Wiegand, OSDP

Hikvision DS-K1107AMK
  • Mifare card plus 12-key PIN
  • RS-485, Wiegand 26/34, OSDP
  • Mullion size, IP65
  • Tamper, buzzer, online upgrade

What you need with this terminal

Add the parts below; our engineers size the system for your site and send a free BOQ.

PartModelWhat it doesQty
Controlleraccess controllerNeeded when the terminal does not drive the lock itself; see the specsoptional
Lockmagnetic or bolt lockHeld or released by the controller1 per door
Exit buttonexit buttonOpens from inside without a card1 per door
Cards or tagsMifare / EM cardsOne per user, enrolled on the controller or terminalper user
Power12 VDC supplyFor the controller and the lock, sized by our engineers1
Network cableCat5e / Cat6Controller or terminal to the networkper device
ManagementHikCentral access controlUsers, schedules, attendance reports across sitesoptional
InstallationESCO installation serviceCabling, mounting, configuration and handover by our engineersoptional

Every site is different. Tell us the site, the counts and what you need it to do, and we prepare the full list and quote.

Get a free BOQ →

Key specs

  • Card reader with keypad for a Hikvision access controller: M1 (Mifare 13.56 MHz) card plus 12 keys (0 to 9, *, #) for card + PIN or PIN only
  • RS-485, Wiegand 26/34 (DIP switch) and OSDP to the controller; 32-bit processor
  • Tamper alarm; buzzer; online upgrade; watchdog
  • 12 VDC, ≤2 W; -20 to 65 °C (-4 to 149 °F); IP65
  • Mullion size 115 x 44 x 22 mm; wall mount with screws (no gang box); 160 g
Chat on WhatsApp

System

Processor

32-bit

Interface

TAMPER

Support

RS-485

Support

Wiegand

Support (set via DIP switch)

Authentication

Card reading frequency

13.56 MHz

Card reading distance

≤50 mm (≤1.97")

General

Indicator

Power indicator, status indicator

Power supply

12 VDC

Power consumption

≤2 W

Working temperature

-20 °C to 65 °C (-4 °F to 149 °F)

Working humidity

10% to 90% (Non Condensing)

Protective level

IP65

Dimensions

115 mm × 44 mm × 22 mm (4.53'' × 1.73'' × 0.87'')

Installation

Wall Mounting with Screws; Do Not Support Gang Box

Keypad

Keypad with 12 Keys (0~9, *, #)

Buzzer

Support

Questions & answers

Know before you buy

Quick answers about the DS-K1107AMK, and how it compares.

Does a card reader work on its own?

No. A reader only reads the card or PIN and passes it to an access controller, which decides and releases the lock. One controller takes several readers, one per door side. If you want a single device that does everything at one door, choose an access terminal instead. Ask us and we match the reader to your controller.

EM or Mifare card: which one do I need?

They are two different card types and a reader works with one of them. EM (125 kHz) cards are the cheapest and fine for a small office. Mifare (13.56 MHz) cards are harder to copy and the same card can also work on turnstiles, lifts and payment. If you already have cards, match the reader to them; for a new site we recommend Mifare. Ask us if you are not sure which cards you have.

Can I buy this online?

Hikvision security products are installed products, so we start with a free pre-sales consultation: our engineers suggest the right model and everything that goes with it for your site and send a quote. Use Request a Quote on this page, contact us or WhatsApp +92 300 ESCO 301. Offices in Karachi, Lahore, Islamabad and Rawalpindi. 1 year carry-in warranty.

Similar Products
Chat on WhatsApp
WhatsApp