Skip to Content
DS-K1201AEF DS-K1201AEF Request a Quote

DS-K1201AEF

Fingerprint reader for sites on EM cards: same reader as the DS-K1201AMF but reads the cheap 125 kHz EM cards most offices already have. RS-485 to a Hikvision access controller, 5000 fingerprints, decision in under a second, -40 to 70 °C. Scroll down for details.

Rs. 0 Rs. 0

  • Brand - HIKVISION
HIKVISION
HIKVISION

Comprehensive AIoT Solutions for Security, Smart Home, and Beyond

DS-K1201AEF

Fingerprint and EM Card Reader, 5000 Fingerprints, RS-485

Hikvision DS-K1201AEF
  • 5000 fingerprints, under 1 s
  • EM (125 kHz) card
  • Card, fingerprint or card + fingerprint
  • RS-485 to the controller, -40 to 70 °C

What you need with this terminal

Add the parts below; our engineers size the system for your site and send a free BOQ.

PartModelWhat it doesQty
Controlleraccess controllerNeeded when the terminal does not drive the lock itself; see the specsoptional
Lockmagnetic or bolt lockHeld or released by the controller1 per door
Exit buttonexit buttonOpens from inside without a card1 per door
Cards or tagsMifare / EM cardsOne per user, enrolled on the controller or terminalper user
Power12 VDC supplyFor the controller and the lock, sized by our engineers1
Network cableCat5e / Cat6Controller or terminal to the networkper device
ManagementHikCentral access controlUsers, schedules, attendance reports across sitesoptional
InstallationESCO installation serviceCabling, mounting, configuration and handover by our engineersoptional

Every site is different. Tell us the site, the counts and what you need it to do, and we prepare the full list and quote.

Get a free BOQ →

Fingerprint Reader

Hikvision DS-K1201AEF Fingerprint Reader & EM card Reader

Fingerprint

Max. 5000 fingerprints storage

Authentication Mode

Supports Multiple Authentication Modes (Card, Fingerprint, & Card + Fingerprint)

Comparison Time

Fingerprint comparison time: 1:1 ≤ 1 s, 1:1000 ≤ 1 s; FRR ≤ 0.01%, FAR ≤ 0.001%

Buzzer

Built-in Buzzer for status indication

Tamper Proof

Tamper-Proof Function

Key specs

  • Fingerprint and card reader for a Hikvision access controller: EM (125 kHz) card
  • Optical CMOS fingerprint module, 5000 fingerprints; 1:N and 1:1 (card + fingerprint); compare under 1 s; FRR ≤0.01%, FAR ≤0.001%
  • Modes: card, fingerprint, card + fingerprint
  • RS-485 to the Hikvision access controller (19200 bps, CRC check); optical isolation on the line
  • Encrypted fingerprint storage; buzzer; clock and watchdog; tamper
  • 12 VDC, ≤1.6 W; -40 to 70 °C (-40 to 158 °F); 62 x 132 x 44 mm; surface mount
Chat on WhatsApp

Interface

TAMPER

1

Authentication

Fingerprint module

Optical fingerprint module

Fingerprint comparing mode

1:1/1:N

Card type

EM card

General

Power supply

12 VDC ± 10%

Working temperature

-40 °C to 70 °C (-40 °F to 158 °F)

Working humidity

10% to 90% (No condensing)

Dimensions

62 mm × 132 mm × 44 mm (2.44" × 5.20" × 1.73")

Installation

Surface mounting

Buzzer

Support

Questions & answers

Know before you buy

Quick answers about the DS-K1201AEF, and how it compares.

Does a card reader work on its own?

No. A reader only reads the card or PIN and passes it to an access controller, which decides and releases the lock. One controller takes several readers, one per door side. If you want a single device that does everything at one door, choose an access terminal instead. Ask us and we match the reader to your controller.

EM or Mifare card: which one do I need?

They are two different card types and a reader works with one of them. EM (125 kHz) cards are the cheapest and fine for a small office. Mifare (13.56 MHz) cards are harder to copy and the same card can also work on turnstiles, lifts and payment. If you already have cards, match the reader to them; for a new site we recommend Mifare. Ask us if you are not sure which cards you have.

Can I buy this online?

Hikvision security products are installed products, so we start with a free pre-sales consultation: our engineers suggest the right model and everything that goes with it for your site and send a quote. Use Request a Quote on this page, contact us or WhatsApp +92 300 ESCO 301. Offices in Karachi, Lahore, Islamabad and Rawalpindi. 1 year carry-in warranty.

Similar Products
Chat on WhatsApp
WhatsApp