DS-D43Q200PT-5V
The Hikvision DS-D43Q200PT-5V is a 5 V 200 W LED power supply.
- 5 V 200 W LED power supply, 40 A output
- Input 176 to 264 VAC
- Efficiency ≥ 87%
- Protection: short circuit and overload
- Size 190 × 82 × 30 mm (L × W × H)
DS-D43Q200PT-5V
The Hikvision DS-D43Q200PT-5V is a 5 V 200 W LED power supply.
- 5 V 200 W LED power supply, 40 A output
- Input 176 to 264 VAC
- Efficiency ≥ 87%
- Protection: short circuit and overload
- Size 190 × 82 × 30 mm (L × W × H)
Key specs
- 5 V 200 W LED power supply, 40 A output
- Input 176 to 264 VAC
- Efficiency ≥ 87%
- Protection: short circuit and overload
- Size 190 × 82 × 30 mm (L × W × H)
- Working temperature -20 °C to +50 °C (AC 230 V, see load derating curve)
- 100% full-load aging test (Hikvision)
| Output | |
|---|---|
| Output voltage | 5 V |
| Output current | 40 A |
| Rated power | 200 W |
| Ripple noise | 150 mVp-p |
| Voltage adjustment range | ± 10% |
| Voltage accuracy | ± 1.0% |
| Line regulation | ± 0.5% |
| Load regulation | ± 2% |
| Start-up and rise time | 500 ms, 50 ms / 230 VAC, load 100% |
| Hold-up time | 20 ms / 230 VAC, load 100% |
| Input | |
| Input voltage | 176 to 264 VAC |
| Frequency range | 47 to 63 Hz |
| Power factor | PF ≥ 0.5 |
| Efficiency | ≥ 87% |
| AC current | 2.3 A (230 VAC) |
| Inrush current | 60 A / 230 VAC |
| Leakage current | < 1 mA / 230 VAC |
| Overload protection | 110% to 140% rated |
| Environment | |
| Operating temperature | -20 °C to +50 °C (AC 230 V, see load derating curve) |
| Operating humidity | 20% to 90% RH, non-condensing |
| General | |
| Product size | 190 × 82 × 30 mm (L × W × H) |
Know before you buy
Quick answers about the DS-D43Q200PT-5V, and how it compares.
Can I buy this online?
Hikvision security products are installed products, so we start with a free pre-sales consultation: our engineers suggest the right model and everything that goes with it for your site and send a quote. Use Request a Quote on this page, contact us or WhatsApp +92 300 ESCO 301. Offices in Karachi, Lahore, Islamabad and Rawalpindi. 1 year carry-in warranty.
How many receiving cards and power supplies does an LED screen need?
Each cabinet or module group has one receiving card, and the cards share 5 V power supplies sized by the modules they feed. The counts come from the screen size and pixel pitch; our LED planning guide explains the calculation and we include the exact numbers in every LED quote.
Does ESCO install and support it?
Yes. Our engineers survey the site, install, configure and hand over, and the same team supports it afterwards. For a product you fit yourself we help with the setup over WhatsApp. Use Request a Quote on this page, contact us or WhatsApp +92 300 ESCO 301. Offices in Karachi, Lahore, Islamabad and Rawalpindi.