DS-3E0510P-E/M
8-Port Gigabit PoE Switch, SFP Uplink
- 8 Gigabit PoE ports, 58 W
- Gigabit RJ45 and SFP uplinks
- Metal, no fan
- 6 kV surge protection
DS-3E0510P-E/M
8-Port Gigabit PoE Switch, SFP Uplink
- 8 Gigabit PoE ports, 58 W
- Gigabit RJ45 and SFP uplinks
- Metal, no fan
- 6 kV surge protection
PoE Switch
Hikvision DS-3E0510P-E/M 8 Port Gigabit Unmanaged POE Switch
SFP Slot
1 × Gigabit SFP fiber optical port
PoE Standard
IEEE 802.3at/af standard
PoE Power Budget
58 W
Mac Address Table
4K
Switching Capacity
20 Gbps
Key specs
- 8 × Gigabit PoE ports (802.3af/at)
- 1 × Gigabit RJ45 + 1 × Gigabit SFP uplink
- PoE budget 58 W, PoE power management
- Switching capacity 20 Gbps, wire-speed, non-blocking
- 6 kV surge protection on PoE ports
- Metal shell, fanless
|
General |
|
|
Shell |
Metal material |
|
Net Weight |
0.635 kg (1.40 lb) |
|
Gross Weight |
1.366 kg (3.01 lb) |
|
Dimensions (W × H × D) |
217.6 mm × 27.8 mm × 108.55 mm (8.6'' × 1.1'' × 4.3'') |
|
Operating Temperature |
0 °C to 40 °C (32 °F to 104 °F) |
|
Storage Temperature |
–40 °C to 85 °C (–40 °F to 185 °F) |
|
Operating Humidity |
5% to 95% (no condensation) |
|
Relative Humidity |
5% to 95% (no condensation) |
|
Power Supply |
48 V DC, 1.35 A |
|
Max. Power Consumption |
65 W |
|
Power Consumption in Idle |
7 W |
|
Installation Mode |
Desk-Mounted, Wall-Mounted |
|
Surge Protection |
6 kV |
|
Network Parameters |
|
|
Ports |
8 × Gigabit PoE port,1 × Gigabit RJ45 port,1 × Gigabit fiber optical port |
|
MAC Address Table |
4 K |
|
Switching Capacity |
20 Gbps |
|
Packet Forwarding Rate |
14.88 Mpps |
|
Internal Cache |
1.5 Mbits |
|
PoE Power Supply |
|
|
PoE Standard |
IEEE 802.3af; IEEE 802.3at |
|
PoE Power Pin |
End-span: 1/2(+), 3/6(-) |
|
PoE Port |
PoE: Ports 1 to 8 |
|
Max. Port Power |
30 W |
|
PoE Power Budget |
58 W |
|
Approval |
|
|
EMC |
FCC (47 CFR Part 15, Subpart B),CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015) |
|
Safety |
UL (UL 60950-1), CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017) |
|
Approval |
CE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006) |
Know before you buy
Quick answers about the DS-3E0510P-E/M, and how it compares.
How many cameras can this PoE switch power?
Two limits apply: the number of PoE ports, and the total PoE budget in watts. Add up the maximum power of each camera from its datasheet and keep about 20% spare. Example: 16 cameras at 6 W each need 96 W, plus 20% is about 115 W, so a switch with a 125 W budget or more is right. A PoE port (802.3af) gives up to 15.4 W and a PoE+ port (802.3at) up to 30 W. PTZ cameras and cameras with heaters, strong IR or strobe lights need PoE+ or Hi-PoE (802.3bt). Not sure? Send us your camera list and we size it for you.
Unmanaged, smart or managed switch: which one do I need?
Unmanaged switches are plug and play, with nothing to set up: good for small systems. Smart (web managed) switches add a web page and app view for VLANs, port status, cable checks and, on many models, PoE watchdog, so you can find and fix problems from your desk. Managed (Layer 2+ or Layer 3) switches add full control, routing and ring protection for large sites, campuses and city projects. For most CCTV jobs with 8 to 48 cameras, a smart PoE switch is the best value. Ask us if you are not sure.
What are the SFP fiber ports for?
SFP and SFP+ ports take a small plug-in fiber module, sold separately. Use them to link the switch to the NVR room or main switch when the distance is over 100 m (330 ft), or between buildings. Fiber carries no electricity, so it also stops surges travelling between buildings. Choose single-mode or multi-mode modules to match your fiber cable, and use a matching pair of modules at the two ends. Ask us for the right modules and cable.