DS-3E1309P-EI/M
8-Port Smart PoE Switch, Gigabit Uplink
- 8 PoE ports, 60 W budget
- Gigabit uplink
- PoE watchdog, topology view
- Long-range PoE up to 300 m (1,000 ft)
DS-3E1309P-EI/M
8-Port Smart PoE Switch, Gigabit Uplink
- 8 PoE ports, 60 W budget
- Gigabit uplink
- PoE watchdog, topology view
- Long-range PoE up to 300 m (1,000 ft)
Smart PoE Switch
Hikvision DS-3E1309P-EI/M 8 Port Fast Ethernet Smart POE Switch
Ports
8 × 100 Mbps PoE RJ45 ports, 1 × Gigabit network RJ45 port.
PoE Standard
IEEE 802.3at/af standard for PoE ports.
PoE Power Budget
Total PoE Power Budget 60W
Network Parameters
MAC Add. Table: 8K, Switching Capacity: 5.6 Gbps, Packet Forwarding Rate: 4.17 Mpps
Software Function
Alarm push, network health monitor, Link Aggregation, PoE Watchdog
Key specs
- 8 × 100 Mbps PoE ports (802.3af/at)
- 1 × Gigabit RJ45 uplink
- PoE budget 60 W
- PoE watchdog; network topology, alarm push, health monitor
- Extend mode up to 300 m (1,000 ft)
- 6 kV surge protection
|
General |
|
|
Shell |
Metal material, fan-free design |
|
Net Weight |
0.4 kg (0.9 lb) |
|
Gross Weight |
0.9 kg (2.0 lb) |
|
Dimensions (W × H × D) |
170.00 mm × 27.60 mm × 93.10 mm (6.69'' × 1.09'' × 3.67'') |
|
Operating Temperature |
0 °C to 40 °C (32 °F to 104 °F) |
|
Storage Temperature |
-40 °C to 85 °C (-40 °F to 185 °F) |
|
Operating Humidity |
5% to 95% (no condensation) |
|
Relative Humidity |
5% to 95% (no condensation) |
|
Power Supply |
48 V DC, 1.35 A |
|
Installation Mode |
Desk-Mounted,Wall-Mounted |
|
Max. Power Consumption |
65 W |
|
Power Consumption in Idle |
5 W |
|
Surge Protection |
6 kV |
|
Network Parameters |
|
|
Ports |
8 × 10/100 Mbps PoE port,1 × Gigabit RJ45 port |
|
MAC Address Table |
8 K |
|
Switching Capacity |
5.6 Gbps |
|
Packet Forwarding Rate |
4.17 Mpps |
|
Internal Cache |
4 Mbits |
|
PoE Power Supply |
|
|
PoE Standard |
IEEE 802.3af,IEEE 802.3at |
|
PoE Power Pin |
8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-) |
|
PoE Port |
PoE: Ports 1 to 8 |
|
Max. Port Power |
30 W |
|
PoE Power Budget |
60 W |
|
Software Function |
|
|
Long Range |
Ports 1 to 8: up to 300 m. Long range performance may vary depend on camera model or cable condition. |
|
HPP |
Support one-click activation and remote management via Hik-Partner Pro. Functions supported: Display the port rate. Display the port bandwidth utilization rate. Display the PoE power usage. Display topology information. Display the alarm status. Restart ports and devices. Enable port long-rage mode. Remotely upgrade the device. |
|
System Maintenance |
Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support remote management via Hik-Partner Pro. Support 802.1ab LLDP for peer device discovery. |
|
PoE Watchdog |
Ports 1 to 8: auto detect and restart the cameras that do not respond. |
|
Approval |
|
|
EMC |
CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020) |
|
Safety |
UL (UL 60950-1), CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017) |
|
Chemistry |
CE-RoHS (2011/65/EU), WEEE (2012/19/EU), Reach (Regulation (EC) No.1907/2006) |
Know before you buy
Quick answers about the DS-3E1309P-EI/M, and how it compares.
How many cameras can this PoE switch power?
Two limits apply: the number of PoE ports, and the total PoE budget in watts. Add up the maximum power of each camera from its datasheet and keep about 20% spare. Example: 16 cameras at 6 W each need 96 W, plus 20% is about 115 W, so a switch with a 125 W budget or more is right. A PoE port (802.3af) gives up to 15.4 W and a PoE+ port (802.3at) up to 30 W. PTZ cameras and cameras with heaters, strong IR or strobe lights need PoE+ or Hi-PoE (802.3bt). Not sure? Send us your camera list and we size it for you.
What is long-range PoE, up to 300 m?
A normal network cable run is limited to 100 m (330 ft). In long-range (extend) mode the switch lowers the port speed to 10 Mbps, so data and power can travel up to 300 m (1,000 ft) on one good quality copper Cat6 cable. 10 Mbps is enough for one camera, so use this mode for one camera per port, for example at a far gate or along a boundary wall. For longer runs use fiber with SFP modules.
Unmanaged, smart or managed switch: which one do I need?
Unmanaged switches are plug and play, with nothing to set up: good for small systems. Smart (web managed) switches add a web page and app view for VLANs, port status, cable checks and, on many models, PoE watchdog, so you can find and fix problems from your desk. Managed (Layer 2+ or Layer 3) switches add full control, routing and ring protection for large sites, campuses and city projects. For most CCTV jobs with 8 to 48 cameras, a smart PoE switch is the best value. Ask us if you are not sure.