DS-3E1318P-EI/M
16-Port Smart PoE Switch, 130 W
- 16 PoE ports, 130 W budget
- Gigabit combo and RJ45 uplinks
- PoE watchdog, topology view
- Link aggregation
DS-3E1318P-EI/M
16-Port Smart PoE Switch, 130 W
- 16 PoE ports, 130 W budget
- Gigabit combo and RJ45 uplinks
- PoE watchdog, topology view
- Link aggregation
Smart PoE Switch
Hikvision DS-3E1318P-EI/M 16 Port Fast Ethernet Smart POE Switch
Ports
16 × 10/100 Mbps PoE port,1 × Gigabit combo,1 × Gigabit RJ45 port.
PoE Standard
IEEE 802.3at/af standard for PoE ports.
PoE Power Budget
Total PoE Power Budget 130W
Network Parameters
MAC Add. Table: 16K, Switching Capacity: 9.2 Gbps, Packet Forwarding Rate: 6.84 Mpps
Software Function
Alarm push, network health monitor, Link Aggregation, PoE Watchdog
Key specs
- 16 × 10/100 Mbps PoE ports (802.3af/at)
- 1 × Gigabit combo + 1 × Gigabit RJ45 uplink
- PoE budget 130 W
- PoE watchdog; topology, alarm push, health monitor; link aggregation
- Switching capacity 9.2 Gbps, 16K MAC table
- 6 kV surge protection; 100-240 VAC
|
General |
|
|
|
Shell |
Metal material |
|
|
Net Weight |
1.8 kg (4.0 lb) |
|
|
Gross Weight |
3.0 kg (6.6 lb) |
|
|
Dimensions (W × H × D) |
335.00 mm × 44.50 mm × 226.00 mm (13.19'' × 1.75'' × 8.90'') |
|
|
Operating Temperature |
0 °C to 45 °C (32 °F to 113 °F) |
|
|
Storage Temperature |
-40 °C to 85 °C (-40 °F to 185 °F) |
|
|
Operating Humidity |
5% to 95% (no condensation) |
|
|
Relative Humidity |
5% to 95% (no condensation) |
|
|
Power Supply |
100~240 V AC, 50/60 Hz, Max. 2.5 A |
|
|
Installation Mode |
Rack (equipped with mounting ears) |
|
|
Max. Power Consumption |
150 W |
|
|
Power Consumption in Idle |
20 W |
|
|
Surge Protection |
6 kV |
|
|
Network Parameters |
|
|
|
Ports |
16 × 10/100 Mbps PoE port,1 × Gigabit combo,1 × Gigabit RJ45 port |
|
|
MAC Address Table |
16 K |
|
|
Switching Capacity |
9.2 Gbps |
|
|
Packet Forwarding Rate |
6.84 Mpps |
|
|
Internal Cache |
4 Mbits |
|
|
PoE Power Supply |
|
|
|
PoE Standard |
IEEE 802.3af, IEEE 802.3at |
|
|
PoE Power Pin |
8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-) |
|
|
PoE Port |
PoE: Ports 1 to 16 |
|
|
Max. Port Power |
30 W |
|
|
PoE Power Budget |
130 W |
|
|
Software Function |
|
|
|
Long Range |
Ports 1 to 16: up to 300 m. Long range performance may vary depend on camera model or cable condition. |
|
|
VIP Port |
Ports 1 to 8: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient. |
|
|
Link Aggregation |
Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 1 aggregation group. |
|
|
PoE Watchdog |
Ports 1 to 16: auto detect and restart the cameras that do not respond. |
|
|
HPP |
Support one-click activation and remote management via Hik-Partner Pro. Functions supported: Display the port rate. Display the port bandwidth utilization rate. Display the PoE power usage. Display topology information. Display the alarm status. Restart ports and devices. Enable port long-rage mode. Remotely upgrade the device. |
|
|
System Maintenance |
Support remote upgrade, default parameter restoration, logs viewing, and basic network parameter configuration. |
|
|
Approval |
||
|
EMC |
CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020), IC (ICES-003: Issue 7:2020), RCM (AS/NZS CISPR 32: 2015) |
|
|
Safety |
UL (UL 60950-1), CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017) |
|
|
Chemistry |
CE-RoHS (2011/65/EU) |
|
Know before you buy
Quick answers about the DS-3E1318P-EI/M, and how it compares.
How many cameras can this PoE switch power?
Two limits apply: the number of PoE ports, and the total PoE budget in watts. Add up the maximum power of each camera from its datasheet and keep about 20% spare. Example: 16 cameras at 6 W each need 96 W, plus 20% is about 115 W, so a switch with a 125 W budget or more is right. A PoE port (802.3af) gives up to 15.4 W and a PoE+ port (802.3at) up to 30 W. PTZ cameras and cameras with heaters, strong IR or strobe lights need PoE+ or Hi-PoE (802.3bt). Not sure? Send us your camera list and we size it for you.
Unmanaged, smart or managed switch: which one do I need?
Unmanaged switches are plug and play, with nothing to set up: good for small systems. Smart (web managed) switches add a web page and app view for VLANs, port status, cable checks and, on many models, PoE watchdog, so you can find and fix problems from your desk. Managed (Layer 2+ or Layer 3) switches add full control, routing and ring protection for large sites, campuses and city projects. For most CCTV jobs with 8 to 48 cameras, a smart PoE switch is the best value. Ask us if you are not sure.
What are the SFP fiber ports for?
SFP and SFP+ ports take a small plug-in fiber module, sold separately. Use them to link the switch to the NVR room or main switch when the distance is over 100 m (330 ft), or between buildings. Fiber carries no electricity, so it also stops surges travelling between buildings. Choose single-mode or multi-mode modules to match your fiber cable, and use a matching pair of modules at the two ends. Ask us for the right modules and cable.