DS-3E1326P-EI/M
24-Port Smart PoE Switch, 230 W
- 24 PoE ports, 230 W budget
- Gigabit combo and RJ45 uplinks
- PoE watchdog, topology view
- Link aggregation
DS-3E1326P-EI/M
24-Port Smart PoE Switch, 230 W
- 24 PoE ports, 230 W budget
- Gigabit combo and RJ45 uplinks
- PoE watchdog, topology view
- Link aggregation
Smart PoE Switch
Hikvision DS-3E1326P-EI/M 24 Port Fast Ethernet Smart POE Switch
Ports
24 × 10/100 Mbps PoE port,1 × Gigabit combo,1 × Gigabit RJ45 port.
PoE Standard
IEEE 802.3at/af standard for PoE ports.
PoE Power Budget
Total PoE Power Budget 230W
Network Parameters
MAC Addr. Table: 16K, Switching Capacity: 14.8Gbps, Packet Forwarding Rate: 11.01Mpps
Software Function
Alarm push, network health monitor, Link Aggregation, PoE Watchdog
Key specs
- 24 × 10/100 Mbps PoE ports (802.3af/at)
- 1 × Gigabit combo + 1 × Gigabit RJ45 uplink
- PoE budget 230 W
- PoE watchdog; topology, alarm push, health monitor; link aggregation
- Switching capacity 14.8 Gbps, 16K MAC table
- 6 kV surge protection; 100-240 VAC
Know before you buy
Quick answers about the DS-3E1326P-EI/M, and how it compares.
How many cameras can this PoE switch power?
Two limits apply: the number of PoE ports, and the total PoE budget in watts. Add up the maximum power of each camera from its datasheet and keep about 20% spare. Example: 16 cameras at 6 W each need 96 W, plus 20% is about 115 W, so a switch with a 125 W budget or more is right. A PoE port (802.3af) gives up to 15.4 W and a PoE+ port (802.3at) up to 30 W. PTZ cameras and cameras with heaters, strong IR or strobe lights need PoE+ or Hi-PoE (802.3bt). Not sure? Send us your camera list and we size it for you.
Unmanaged, smart or managed switch: which one do I need?
Unmanaged switches are plug and play, with nothing to set up: good for small systems. Smart (web managed) switches add a web page and app view for VLANs, port status, cable checks and, on many models, PoE watchdog, so you can find and fix problems from your desk. Managed (Layer 2+ or Layer 3) switches add full control, routing and ring protection for large sites, campuses and city projects. For most CCTV jobs with 8 to 48 cameras, a smart PoE switch is the best value. Ask us if you are not sure.
What are the SFP fiber ports for?
SFP and SFP+ ports take a small plug-in fiber module, sold separately. Use them to link the switch to the NVR room or main switch when the distance is over 100 m (330 ft), or between buildings. Fiber carries no electricity, so it also stops surges travelling between buildings. Choose single-mode or multi-mode modules to match your fiber cable, and use a matching pair of modules at the two ends. Ask us for the right modules and cable.