DS-3E2528P-H
24-Port Gigabit Managed PoE+ Switch
- 24 Gigabit PoE+ ports, 370 W
- 4 Gigabit SFP ports
- CLI, web, Telnet and SSH
- ARP detection, QoS
DS-3E2528P-H
24-Port Gigabit Managed PoE+ Switch
- 24 Gigabit PoE+ ports, 370 W
- 4 Gigabit SFP ports
- CLI, web, Telnet and SSH
- ARP detection, QoS
· DS-3E2500-H series supports the combination of "Ethernet port + optical port" to meet networking requirements of various scenarios, which is convenient for users to build a flexible network. It offers 24-port, and 48-port access and all ports support Gigabit wire speed forwarding capabilities to meet users' needs.
· The virtualization technology allows each slave device in the stack to serve as the backup of the master, creating control and data link redundancy, as well as uninterrupted layer-3 forwarding. This improves the reliability, avoids unplanned business downtime and serves to improve overall performance. When the master device fails, traffic remains uninterrupted.
· Support ARP Detection, which can prevent hackers or attackers from implementing "ARP spoofing attacks" through ARP packets. Support IP Source Guard, which can prevent illegal address spoofing including MAC spoofing, IP spoofing, MAC/IP spoofing, and DoS attacks. Support DHCP Snooping, which can prevent private DHCP servers and ensure the authenticity and consistency of the DHCP environment. Support port security features, which can prevent MAC address-based attacks and realize traffic permit/limit based on a MAC address.
· Support speed limit on port and traffic to prevent malicious invasion of network bandwidth and provide multiple granular management tools. Support SP (Strict Priority), WRR (Weighted Round Robin), and SP+WRR queue scheduling algorithms, and support multi-priority data transmission. Support rich IPv6 services and multiple IPv6 management tools.
· Support CLI command line, Web network management, and Telnet, making device management more convenient. And support SSH2.0 and other encryption methods, making management more secure. Support remote upgrade of devices through FTP and TFTP, SNMP v1/v2c/v3
· Energy-saving design greatly reduces device power consumption and trouble spots. Radiation is reduced to reach the standard for household electrical appliances and is harmless to humans.
Key specs
- 24 × 10/100/1000 PoE+ ports
- 4 × 1000Base-X SFP ports
- PoE budget 370 W
- Management: CLI, web, Telnet, SSH 2.0, console port
- ARP detection, QoS
- Switching capacity 56 Gbps
- 100-240 VAC
|
Service ports |
24×10/100/1000BASE-T ports (POE+), 4×1000Base-X SFP ports. |
|
|
Switching capacity |
Whole-Device Performance: 56 Gbps Port Performance: 56 Gbps |
|
|
Packet forwarding rate |
Whole-Device Performance: 41.66 Mpps Port Performance: 41.66 Mpps |
|
|
Management port |
1 Console port |
|
|
Electrical port attribute |
Half-duplex, full-duplex, and auto-negotiation MDI/MDI-X |
|
|
Dimensions (W×D×H) (mm） |
440×260×44 |
|
|
Input voltage |
AC：100V～240V AC, 50/60Hz; Maximum voltage range: 90V to 264V,47Hz to 63Hz |
|
|
POE |
POE+ with the maximum 30w output power per port |
|
|
Power consumption |
MAX: 448W (POE: 370W) |
|
|
Weight |
≤ 4.5kg |
|
|
Operating temperature |
-5ºC to 45ºC |
|
|
Operating humidity |
10% RH to 95% RH, non-condensing |
|
|
Ethernet functions |
LLDP Static MAC configuration Limit of number of MAC addresses to be learned (up to 8K) Port mirroring and traffic mirroring Port aggregation (up to 24 groups and 8 ports for each group) Port isolation STP / RSTP / MSTP IEEE 802.3ad (dynamic link aggregation) and static port aggregation |
|
|
VLAN |
802.1Q (up to 4K VLAN) Protocol-based VLAN MAC-based VLAN GUEST VLAN VLAN mapping MVRP |
|
|
IP routing |
Static routing |
|
|
DHCP |
DHCP Relay DHCP Client DHCP Snooping |
|
|
Multicast |
IGMP V1/V2/V3 snooping PIM Snooping Multicast VLAN IPv6 multicast setting |
|
|
QoS |
SP/WRR/SP+WRR queue scheduling 802.1p and DSCP priority mapping Port speed limit |
|
|
ACL |
ACL on Layer 2, Layer 3 and Layer 4 IPv4 and IPv6 ACLs VLAN ACL |
|
|
IPv6 |
IPv6 static routing and dual-stack DHCPv6 Client and DHCPv6 Snooping ND and PMTU IPv6 Ping, IPv6 Telnet, IPv6 SSHv2, and IPv6 domain name resolution |
|
|
Reliability |
Ethernet OAM DLDP Smart Link Monitor Link |
|
|
Security |
Hierarchical user management and password protection SSH for a secure encrypted channel for user login Specific IP address based FTP logging and password mechanism Prevent attacks from ARP, unknown multicast packet, broadcast packet, unknown unicast packet, TTL=1 packet, and protocol packet MAC address limit IP+MAC+PORT binding IEEE 802.1x Radius and AAA SNMPv3 Broadcast suppression |
|
|
Management Maintenance |
Command line configuration via console / AUX Modem / Telnet / SSH Uploading and downloading of FTP, TFTP, and Xmodem, and SFTP files SNMP V1/V2c/V3 sFlow NQA NTP clock System operating logs |
|
Know before you buy
Quick answers about the DS-3E2528P-H, and how it compares.
How many cameras can this PoE switch power?
Two limits apply: the number of PoE ports, and the total PoE budget in watts. Add up the maximum power of each camera from its datasheet and keep about 20% spare. Example: 16 cameras at 6 W each need 96 W, plus 20% is about 115 W, so a switch with a 125 W budget or more is right. A PoE port (802.3af) gives up to 15.4 W and a PoE+ port (802.3at) up to 30 W. PTZ cameras and cameras with heaters, strong IR or strobe lights need PoE+ or Hi-PoE (802.3bt). Not sure? Send us your camera list and we size it for you.
Unmanaged, smart or managed switch: which one do I need?
Unmanaged switches are plug and play, with nothing to set up: good for small systems. Smart (web managed) switches add a web page and app view for VLANs, port status, cable checks and, on many models, PoE watchdog, so you can find and fix problems from your desk. Managed (Layer 2+ or Layer 3) switches add full control, routing and ring protection for large sites, campuses and city projects. For most CCTV jobs with 8 to 48 cameras, a smart PoE switch is the best value. Ask us if you are not sure.
What are the SFP fiber ports for?
SFP and SFP+ ports take a small plug-in fiber module, sold separately. Use them to link the switch to the NVR room or main switch when the distance is over 100 m (330 ft), or between buildings. Fiber carries no electricity, so it also stops surges travelling between buildings. Choose single-mode or multi-mode modules to match your fiber cable, and use a matching pair of modules at the two ends. Ask us for the right modules and cable.