Skip to Content
DS-2FA3616-DZ-HW DS-2FA3616-DZ-HW Request a Quote
  2. Shop
  3. Hikvision
  4. Video Surveillance
  5. Accessories
  6. Power Supplies and Adaptors
  7. DS-2FA3616-DZ-HW
  8. Power Supplies and Adaptors
NDR-240-48
NDR-240-48
DS-1005KI
DS-1005KI
DS-2FA3616-DZ-HW

DS-2FA3616-DZ-HW

(0 reviews)

36 VDC 1.67 A power adapter (max. 60 W) for cameras and network devices that need 36 V. Wide 100-240 VAC input, short circuit, over-current and over-voltage protection, table mount, 1.5 m output wire and a C7 power cord included. Scroll down for details.

See full specs and details Have a question? 3 answered
Rs. 0 Rs. 0

  • Brand - HIKVISION
Request a Quote
HIKVISION
HIKVISION

Comprehensive AIoT Solutions for Security, Smart Home, and Beyond

DS-2FA3616-DZ-HW

36 VDC 1.67 A power adapter (max. 60 W) for cameras and network devices that need 36 V.

Hikvision DS-2FA3616-DZ-HW
  • Output 36 VDC, 1.67 A, max. 60 W (40 W at 40-70 °C)
  • Input 100-240 VAC, 50 Hz
  • Short circuit, over-current and over-voltage protection
  • Ripple and noise 150 mVp-p, load regulation ±5%
  • C8 input with C7 power cord; two-wire output, 1.5 m (red +)
Power Supplies and AdaptorsAccessoriesHikvision

What you need with this camera

Add the parts below; our engineers size the system for your site and send a free BOQ.

PartModelWhat it doesQty
RecorderHikvision NVRRecords and plays back the camera1 per system
PowerPoE port or adaptorSee the Specifications tab for this model1
Network cableCat5e / Cat6Camera to the switch, up to 100 m (328 ft)per device
MountWall or pole bracketPicked by our engineers for your site1
Hard driveSurveillance HDDFitted in the NVR, sized by days of recording1 or more
InstallationESCO installation serviceCabling, mounting, configuration and handover by our engineersoptional

Every site is different. Tell us the site, the counts and what you need it to do, and we prepare the full list and quote.

Get a free BOQ →

Key specs

  • Output 36 VDC, 1.67 A, max. 60 W (40 W at 40-70 °C)
  • Input 100-240 VAC, 50 Hz
  • Short circuit, over-current and over-voltage protection
  • Ripple and noise 150 mVp-p, load regulation ±5%
  • C8 input with C7 power cord; two-wire output, 1.5 m (red +)
  • CE, GS, CCC, RCM, UL, FCC
  • 109.8 × 57.3 × 36 mm, 108 g
Chat on WhatsApp
Questions & answers

Know before you buy

Quick answers about the DS-2FA3616-DZ-HW, and how it compares.

How do I choose the right power supply?

Add up the power of every camera on the supply: use the maximum watts (or amps at 12 V) from each camera datasheet, and keep about 20% spare. Check the voltage too: 12 V cameras need a 12 V supply, 36 V devices need 36 V. On long cable runs use thicker wire, so the voltage at the camera does not drop. Not sure? Send us your camera list and we size it for you.

Can I buy this online?

Hikvision security products are installed products, so we start with a free pre-sales consultation: our engineers suggest the right model and everything that goes with it for your site and send a quote. Use Request a Quote on this page, contact us or WhatsApp +92 300 ESCO 301. Offices in Karachi, Lahore, Islamabad and Rawalpindi. 1 year carry-in warranty.

How do I size a power supply?

Add up the current of everything it feeds at the same voltage, then leave about 20 percent headroom; a supply run near its limit gets hot and fails early. Long cable runs drop voltage, so cameras far from a central supply may need a local adaptor instead. Send us the device list and distances and we pick the supply.

Chat on WhatsApp
WhatsApp