Live music bars & clubs
Let visiting acts mix their performance while staff use a simpler panel for background music. Presets help recall settings for different events.
| Specification | Value |
|---|---|
| Model | PM3000-X |
| Product family | PowerMate-X |
| Product type | Powered digital mixer with DSP amplification |
| Manufacturer order number | Z.01X.002.914 |
| Rack format | 19-inch, 3 RU |
| Colour | Black |
Designed in | Straubing, Germany |
Country of manufacture | Portugal |
| Specification | Value |
|---|---|
| Amplifier channels | 4 |
| Total rated output power | 3,000 W |
| Output stage | Class D, fixed frequency |
| Loudspeaker operation | Low-impedance and direct-drive 70 V / 100 V |
| Maximum output voltage per channel, 5–16 Ω mode | 145 V peak |
| Maximum output current per channel, 2–4 Ω mode | 33 A peak |
| Loudspeaker Load | Output per Channel, All Channels Equally Driven | Maximum Output per Individual Channel |
|---|---|---|
| 2 Ω | 750 W | 1,000 W |
| 2.7 Ω | 750 W | 800 W |
| 4 Ω | 600 W | 600 W |
| 8 Ω | 750 W | 1,000 W |
| 70 V | 750 W | 750 W |
| 100 V | 750 W | 1,000 W |
| Specification | Value |
|---|---|
| Voltage gain, referenced to line output | 30 dB / 33 dB / 36 dB for Lo-Z / 70 V / 100 V modes |
| Mic input sensitivity, all level controls at maximum, 100 V mode | −74 dBu (155 µV) |
| THD+N, 3 dB below maximum output, 1 kHz, AES17 | <0.1% |
| Crosstalk, 1 kHz, 12 dB below maximum output, 8 Ω | <−75 dB |
| Frequency response, mic input to speaker output | 20 Hz–20 kHz, ±1 dB |
| Damping factor, 20–200 Hz, 8 Ω | >200 |
| Output noise, A-weighted, fader down, Eco mode | <−70 dBu |
| Specification | Value |
|---|---|
| Mic/line input channels | 8 |
| Input connectors | 8 × XLR/TRS combo |
| Input gain | 0–60 dB |
| Phantom power | +48 V, switchable per input |
| Line attenuation | 14 dB |
| Maximum mic input level, balanced / unbalanced | +18 dBu / +12 dBu |
| Maximum line input level, balanced / unbalanced | +32 dBu / +22 dBu |
| Balanced input impedance, mic / line | 3.4 kΩ / 18 kΩ |
| Equivalent input noise, A-weighted, 150 Ω source | −127 dBu |
| CMRR, 30 dB gain, 1 kHz | >80 dB |
| A/D conversion | 24-bit, 120 dB(A) dynamic range |
| Specification | Value |
|---|---|
| Mix buses | Aux 1, Aux 2, Master and PFL |
| Mix outputs | Aux 1, Aux 2, Master, Master B and Phones |
| Maximum line output level | +18 dBu |
| Line output impedance | 100 Ω, actively balanced |
| Line output noise, A-weighted, fader down | <−96 dBu |
| Supported headphone impedance | 16–250 Ω |
| D/A conversion | 24-bit, 115 dB(A) dynamic range |
| Frequency response, mic input to line output | 20 Hz–20 kHz, ±0.5 dB |
| THD+N, mic input to line output, +15 dBu, 1 kHz, AES17 | <0.003% |
| Mic input to line output latency | 0.96 ms |
| Reference level for 0 dBFS | +18 dBu |
| Specification | Value |
|---|---|
| High-pass filter | 80 Hz, 24 dB/octave |
| Vocal Voicing | Dedicated voice-enhancement filter |
| Standard 4-band EQ | Low shelf at 60 Hz, low-mid at 300 Hz, high-mid at 3 kHz and high shelf at 12 kHz |
| Standard EQ adjustment | ±15 dB |
| X-TRA low-band EQ | 20–200 Hz, shelf/bell, bell Q = 3.0, ±15 dB |
| X-TRA low-mid EQ | 100 Hz–2 kHz, Q = 1.0 / 3.0, ±15 dB |
| X-TRA high-mid EQ | 400 Hz–8 kHz, Q = 1.0 / 3.0, ±15 dB |
| X-TRA high-band EQ | 2–20 kHz, shelf/bell, bell Q = 3.0, ±15 dB |
| X-TRA compressor controls | Threshold, ratio, gain, slow/fast and bypass |
| X-TRA noise-gate controls | Threshold, depth, hold, slow/fast and bypass |
| Automixer | Gain-sharing for channels 1–8 |
| Ducker | USB input ducking, triggered by channels 1–8 |
| Pan / balance | Pan for channels 1–8, balance for USB |
| Level, mute and input metering | Channels 1–8 and USB input |
| Specification | Value |
|---|---|
| Graphic EQ configuration | 2 stereo EQs for Master and Master B, plus 2 mono EQs for Aux 1 and Aux 2 |
| Graphic EQ bands | 12 |
| Graphic EQ frequencies | 63, 100, 160, 250, 400 and 630 Hz, plus 1, 1.6, 2.5, 4, 6.3 and 12 kHz |
| Graphic EQ adjustment | ±10 dB |
| AUX feedback filters | Notch filter for Aux 1 and Aux 2, Q = 10, 70 Hz–7 kHz |
| Mixer presets | 10 |
| Effects engines | 2 × Classic Dynacord stereo FX engines |
| Effects types | Reverbs, delays and other effects |
| Factory effects presets | 100 per FX engine, with 4 editable parameters |
| User effects presets | 20 per FX engine |
| Specification | Value |
|---|---|
| USB audio interface | 2 inputs × 2 outputs, class-compliant |
| USB interface sample rates | 44.1 / 48 kHz |
| Media file formats | WAV and MP3 |
| Media playback sample rates | 44.1 / 48 kHz |
| Equivalent input level | +18 dBu at 0 dBFS |
| USB host functions | Audio playback and system-configuration backup |
| Specification | Value |
|---|---|
| Processing sample rate | 48 kHz |
| Loudspeaker processing | FIR-Drive settings |
| Processed outputs | 8, comprising 4 amplifier channels, Aux 1, Aux 2 and stereo Master B |
| Output delay | Up to 300 ms per processed output |
| Output presets | 10 |
| Loudspeaker preset support | Complete SONICUE loudspeaker library |
| Additional processing | Dynacord LPN |
| Specification | Value |
|---|---|
| Mic/line inputs | 8 × XLR/TRS combo |
| Master and AUX outputs | 4 × balanced XLR |
| Master B outputs | 2 × balanced ¼-inch TRS |
| Headphone output | 1 × stereo ¼-inch TRS |
| Front USB audio interface | 1 × USB-C, supplies 5 V / 1.5 A |
| Front USB media port | 1 × USB-A, supplies 5 V / 0.5 A |
| Rear USB power-only port | 1 × USB-C, supplies 5 V / 1.5 A |
| Loudspeaker outputs | 4 × 4-pole twist-lock |
| Footswitch connection | 1 × ¼-inch TRS |
| Footswitch wiring | Tip — on/off, ring — 3.5 V / 20 mA, sleeve — ground |
| MIDI input | 1 × 5-pin DIN |
| Ethernet | 2 × RJ45 |
| Mains input | IEC C14 with V-Lock |
| Specification | Value |
|---|---|
| Mixing interface | Web browser interface inspired by PowerMate |
| User controls | Customisable interfaces with restricted access rights |
| Virtual Control Panel | Browser-based basic system control |
| GPI inputs | 3, configurable as analogue or digital inputs |
GPI control functions | Mute, volume adjustment and preset recall |
| Control connector | 1 × 8-pin male Euroblock |
| Analogue control input range | 0 to +13 V |
| Analogue control input resistance | 133 kΩ |
| Digital control input thresholds | ON below 1.5 V, OFF above 2.0 V |
| Digital input pull-up | 10 kΩ / 10 V |
| Reference voltage output | +10 V, maximum 200 mA, supervised and short-circuit protected |
| Ready/Fault contact | Galvanically isolated relay |
| Ready/Fault contact rating | Maximum 30 V DC / 500 mA DC |
| Specification | Value |
|---|---|
| Mains supply | 100–240 V AC, 50–60 Hz |
| Rated power consumption | 550 W |
| Idle/Eco consumption, output power <1 W | 26 W |
| Standby consumption | 10 W |
| Power supply | Switching power supply with digitally controlled power factor correction |
| Cooling | Front-to-rear airflow with temperature-controlled fans |
| Protection class | Class I, grounded |
| Protection functions | Audio limiters, high temperature, DC, HF, short circuit, back-EMF, peak current, inrush current, mains current and mains over-/undervoltage protection |
| Specification | Value |
|---|---|
| Dimensions without rack ears, W × H × D | 444 × 133 × 300 mm |
| Net weight | 10.4 kg |
| Shipping weight | 13.4 kg |
| Operating temperature | +5 °C to +40 °C |
| Electromagnetic environment | E1, E2 and E3 according to EN 55103 |
| Specification | Value |
|---|---|
| Safety | IEC 62368-1:2018, UL 62368-1, CSA C22.2 No. 62368-1 |
| EMC | EN 55032:2015+A11:2020, EN 55035:2017+A11:2020, EN 61000-3-2:2019+A2:2024, EN 61000-3-3:2013 |
| FCC | 47 CFR Part 15, Class B |
| Canada | ICES-003 |
| Quantity | Item |
|---|---|
| 1 | PM3000-X powered mixer |
| 2 | Rack ears |
| 8 | Rack-ear mounting screws |
| 1 | 8-pin Euroblock control connector |
| 1 | Power cord |
| 4 | Rubber feet |
| 1 | Quick installation guide |
| 1 | Safety and important information booklet |
Quick answers about the PM3000-X, and how it compares.
The digital PowerMate: 8-input mixer, effects, media player and a 3,000 W 4-channel DSP amplifier in one 3U unit, mixed from a web browser.
One box does the whole job. 8 inputs for the Imam, Khateeb and guest mics, the automixer keeps speech clear when several mics are open, 3,000 W drives the main hall on low impedance and the courtyard, minaret and ladies' section on 100 V lines, and staff run it from a phone or tablet with a simple panel.
Electro-Voice LRC column speakers for the prayer hall, EVID ceiling and wall speakers for lobbies and the ladies' section, Bosch horn speakers on the 100 V lines for the minaret and courtyard. FIR-Drive presets for Electro-Voice speakers are built in.
PL80a or a PolarChoice gooseneck at the Mimbar, RE3 or R300 wireless for the Imam. Every input has 48 V phantom power.
Yes. The admin sets up a simple control panel with only volume and source, labelled in plain words, and keeps the full mixer for himself.
Yes, from the browser over the network. For Wi-Fi, connect a Wi-Fi access point to one of its two Ethernet ports.
In 100 V mode each channel gives 750 W with all four channels driven (1,000 W on one channel). With 20% headroom that is about 100 x 6 W ceiling speakers or 20 x 30 W horns per channel.
U Series: one zone, one paging mic and background music, small mosque or shop. V Series: paging and music in up to 8 zones for hotels, malls and mosque complexes. PM3000-X: live mixing with 8 mics, effects and 3,000 W in one box for large mosques, halls and events. None of them is a certified voice alarm system; for EN 54-16 use Bosch PLENA VAS, PAVIRO or PRAESENSA.
ESCO. Ask us for the PM3000-X price, availability and a system design for your mosque or venue.