Key specs
- Audio and Control Signals over LAN/WAN
- 2 Balanced Audio Inputs and 2 Line Outputs
- 8 Supervised Control Inputs and 8 Relay Outputs
- Dual RJ45 Ethernet Ports, 10/100 Mbps
- 18–56 V DC Main and Backup Power Inputs
- EN 54-16 Approval
Bosch PRS 1AIP1: Detailed Technical Specifications
System and Audio Routing
| Specification | Value |
|---|---|
| Product type | Audio-over-IP interface |
| Model / product number | PRS-1AIP1 / F.01U.064.686 |
| System integration | Praesideo and traditional public address systems such as PLENA |
| Audio transport | LAN or WAN |
| Unicast routing | Up to 16 receivers |
| Broadcast and rebroadcasting | Broadcast on the same LAN. Receivers can rebroadcast incoming audio streams. |
| Full-duplex audio | Between two units using PCM or G.711 |
| Optional SIP application | Configurable as a SIP telephone interface with PAVIRO |
| Output audio delay | Configurable for loudspeaker alignment |
Electrical
| Specification | Value |
|---|---|
| Main DC input | 18–56 V DC |
| Backup DC input | 18–56 V DC |
| Power supply supervision | Main and backup inputs supervised |
| Maximum power consumption | 8 W |
Analog Audio
| Specification | Value |
|---|---|
| Audio inputs | 2 balanced inputs on removable screw terminals. Input 1 is selectable between line and microphone. Input 2 is line-level. |
| Audio outputs | 2 balanced line outputs on removable screw terminals |
| Line input sensitivity | −16.5 to +6 dBV |
| Line input impedance | 22 kΩ |
| Line input frequency response | 20 Hz–15 kHz |
| Line input signal-to-noise ratio | >70 dB |
| Microphone input sensitivity | −48.5 to −26 dBV |
| Microphone input impedance | 1,360 Ω |
| Microphone input frequency response | 100 Hz–15 kHz |
| Microphone input signal-to-noise ratio | >60 dB |
| Microphone support | Phantom power for electret or condenser microphones. Supervision detection is 0.4–5 mA for electret and 120–1,300 Ω for dynamic microphones. |
| Maximum line output level | +6 dBV, configurable |
| Pilot-tone supervision | 20 kHz. Detection on input 2 at −30 dBV and regeneration on output 2 at −20 dBV. |
Digital Audio Formats
| Specification | Value |
|---|---|
| MP3 (MPEG-1 Layer III) | 32, 44.1 or 48 kHz. Encoding up to 192 kbps VBR. Stereo decoding up to 320 kbps. |
| MPEG-1 Layer II | 16, 22.05 or 24 kHz, as listed in the datasheet |
| G.711 | μ-law or A-law at 8 or 24 kHz |
| PCM | 16-bit at 8 or 24 kHz |
Network and Serial Connectivity
| Specification | Value |
|---|---|
| Ethernet ports | 2 × RJ45, with the second connection supporting network redundancy |
| Ethernet standards | IEEE 802.3i / 802.3u |
| Ethernet speed and duplex | 10/100 Mbps, full or half duplex with auto-negotiation |
| Network protocols | TCP/IP, UDP, RTP, SIP, IGMP, DHCP and SNMP |
| RS-232 connector | 9-pin male Sub-D, DTE pinout |
| RS-485 connector | Removable screw terminals |
| Serial data rate | 300–115,200 baud |
| Default serial settings | 9,600 baud, 8 data bits, no parity, 1 stop bit |
Control Inputs, Outputs and Indicators
| Specification | Value |
|---|---|
| Control inputs | 8 contact-closure inputs with configurable open-circuit and/or short-circuit supervision |
| Control outputs | 8 voltage-free SPST make contacts |
| Fault output | 1 dedicated voltage-free fault relay |
| Relay contact rating | 24 V, 0.5 A |
| Control and relay connections | Removable screw terminals |
| Front-panel controls and indicators | Recessed reset button, 2 network status LEDs and 8 control input status LEDs |
Mechanical
| Specification | Value |
|---|---|
| Dimensions (H × W × D, as listed by Bosch) | 216 × 38 × 125 mm |
| Weight | 0.7 kg |
| Mounting | Standalone or in a 19-inch rack with an additional mounting frame |
| Colour | Silver with charcoal |
Environmental
| Specification | Value |
|---|---|
| Operating temperature | −5 °C to +50 °C |
| Start-up temperature | 0 °C to +50 °C |
| Storage and transport temperature | −20 °C to +70 °C |
| Operating relative humidity | 15–90%, non-condensing |
| Air pressure | 600–1,100 hPa |
Standards and Approvals
| Specification | Value |
|---|---|
| Voice alarm approval | EN 54-16 (0560-CPD-10219002/AA/04) |
| Electrical safety | IEC 60065 (CB Scheme) |
| Electromagnetic compatibility | EN 55011:2009 Class B and EN 50130-4:1995 + A1:1998 + A2:2003 |
Questions & answers
Know before you buy
Quick answers about the PRS-1AIP1, and how it compares.
What is the Bosch PRS-1AIP1?
The Bosch PRS-1AIP1 is an Audio-over-IP interface that carries audio and control signals between public address systems over a LAN or WAN. It can act as a transmitter, receiver, or both.
Can the PRS-1AIP1 connect Praesideo and PLENA systems?
Yes. The interface uses balanced analog audio inputs and outputs to connect equipment such as Praesideo and PLENA, then carries audio between locations over an IP network
How many receivers can one PRS-1AIP1 send audio to?
It can send a unicast audio stream to up to 16 receivers. Receivers can rebroadcast the incoming stream, and broadcast is supported when the interfaces are on the same LAN.
Can the PRS-1AIP1 trigger remote announcements and report faults?
Yes. Configured control inputs can start a remote audio connection, and control signals can pass fault information between locations. The unit also has a dedicated fault relay for reporting its own faults.
Do I need a dedicated PC to keep the PRS-1AIP1 running?
You configure the interface through a standard web browser. Once configured, it operates without a dedicated PC.
Can I use the PRS-1AIP1 for telephone paging with PAVIRO?
Bosch documents an optional SIP telephone interface application for PAVIRO. If you’re planning telephone paging, share your PAVIRO setup and SIP requirements with ESCO so the team can review the configuration and prepare a quotation.
Who is the authorized Bosch distributor in Pakistan?
ESCO (Electronic Security Company) is an authorized Bosch distributor in Pakistan. Contact ESCO for the Bosch PRS-1AIP1 price in Pakistan, stock availability, or a formal quotation.