|
Technical specifications |
||
|
Electrical |
||
|
Mains power supply |
||
|
Voltage |
230/115 VAC, ±10%, 50/60 Hz |
|
|
Inrush current |
1.5 A at 230 VAC / 3 A at 115 VAC |
|
|
Max power consumption |
50 VA |
|
|
Battery power supply |
||
|
Voltage |
24 VDC, +15% / -15% |
|
|
Current max |
1 A |
|
|
Performance |
||
|
Supported sample rates (fs) |
24 / 22.05 / 16 / 12 / 11.025 / 8 kHz |
|
|
Frequency response |
||
|
@ fs=24kHz @ fs=22.05kHz |
100 Hz to 11 kHz (+1 / -3 dB) 100 Hz to 10 kHz (+1 / -3 dB) |
|
|
@ fs=16kHz |
100 Hz to 7.3 kHz (+1 / -3 dB) |
|
|
@ fs=12kHz |
100 Hz to 5.5 kHz (+1 / -3 dB) |
|
|
@ fs=11.025kHz |
100 Hz to 5 kHz (+1 / -3 dB) |
|
|
@ fs=8kHz |
100 Hz to 3.6 kHz (+1 / -3 dB) |
|
|
Distortion |
<0.1% at 1 kHz |
|
|
S/N (flat at max volume) |
>80 dB |
|
|
Supervision DAC |
1 Hz pilot tone |
|
|
Line input |
1 x |
|
|
Connector |
3-pin XLR, balanced |
|
|
Sensitivity |
1 V |
|
|
Impedance |
20 kohm |
|
|
CMRR |
>25 dB (50 Hz-to 20 kHz) |
|
|
Line input |
1 x |
|
|
Connector |
Cinch, unbalanced |
|
|
Sensitivity |
1 V |
|
|
Impedance |
20 kohm |
|
|
Trigger input |
6 x |
|
|
Connector |
Screw |
|
|
Activation |
Contact closure |
|
|
Supervision method |
Cable loop resistance check |
|
|
Line output |
1 x |
|
|
Connector |
3-pin XLR, balanced |
|
|
Nominal level |
1 V, adjustable |
|
|
Impedance |
<100 ohm |
|
|
Line output |
1 x |
|
|
Connector |
Cinch, unbalanced |
|
|
Nominal level |
1 V, adjustable |
|
|
Impedance |
<100 ohm |
|
|
Message active output |
1 x |
|
|
Connector |
Screw |
|
|
Relay |
100 V, 2 A (voltage free, SPDT) |
|
|
Fault output |
1 x |
|
|
Connector |
Screw |
|
|
Relay |
100 V, 2 A (voltage free, SPDT) |
|
|
Interconnection |
1 x |
|
|
Connector |
9-pin D-sub (RS-232) |
|
|
PC protocol |
115 kb/s, N, 8, 1, 0 (upload) |
|
|
LBB 1925/10 protocol |
19.2 kb/s, N, 8, 1, 0 (zone control) |
|
|
Messages |
||
|
Data format |
WAV-file, 16-bit PCM, mono |
|
|
Memory capacity |
64 Mb EEPROM |
|
|
Recording/playback time |
500 s @ fs=8 kHz 167 s @ fs=24 kHz |
|
|
Number of messages |
12 (maximum) |
|
|
Data retention time |
>10 years |
|
|
Mechanical |
||
|
Dimensions (H x W x D) |
56 x 430 x 270 mm 2.20 x 16.92 x 10.62 inch (19" wide, 1U high, with feet) |
|
|
Weight |
Approx. 3 kg |
|
|
Mounting |
Stand‑alone, 19” rack |
|
|
Color |
Charcoal |
|
|
Environmental |
||
|
Operating temperature |
-10 ºC to +55 ºC (14 ºF to +131 ºF) |
|
|
Storage and transport temperature |
-40 ºC to +70 ºC (-40 ºF to +158 ºF) |
|
|
Relative humidity |
<95% |
|
EVID-S8.2TB: Product FAQs
The Electro-Voice EVID-S8.2TB is an 8-inch two-way surface-mount speaker supplied as a black pair. It is designed for background and foreground music, paging and sound reinforcement in restaurants, retail stores, fitness clubs and hospitality venues.
Yes. Its built-in 60 W transformer supports 70 V and 100 V systems, with selectable 15 W, 30 W and 60 W taps. A 7.5 W tap is available for 70 V systems only. An 8-ohm bypass also supports low-impedance operation.
Yes. The EVID-S8.2TB has an IP54-rated enclosure for indoor and outdoor applications. Its included mounting system supports wall or ceiling installation, with 90° horizontal and 45° vertical adjustment.
The EVID-S8.2TB comes with a pre-assembled mounting system for wall or ceiling installation. It allows 90° horizontal and 45° vertical adjustment to position the speakers. Mounting brackets and a 5 mm Allen wrench are included.
ESCO (Electronic Security Company) is an official Electro-Voice dealer in Pakistan.
Built for Commercial Audio Installation
The Electro-Voice EVID-S8.2TB combines a paintable, fire-rated ABS enclosure with a zinc-plated, powder-coated grille. Connections through the wall-mounted bracket help conceal wiring, while removable locking Euroblock connectors support additional speakers on a distributed line. Its rotatable grille logo accommodates horizontal positioning, and the EVID-S range is designed to work alongside other EVID ceiling and in-wall speakers.
Paintable ABS Enclosure
The fire-rated ABS enclosure can be painted to match the installation décor. The EVID-S8.2TB comes in black RAL 9004.
Corrosion-Resistant Grille
A zinc-plated, powder-coated grille provides corrosion resistance as part of the speaker’s weather-resistant construction.
Concealed Wall-Bracket Wiring
Electrical connections pass through the wall-mounted portion of the mounting system, allowing wiring to remain hidden for a clean installation.
Quick-Attach Mounting
The ball-and-socket mounting system features quick attachment and detachment, with the support bracket integrated into the enclosure.
Locking Euroblock Connections
Removable locking 4-pin Euroblock connectors provide an additional connection option and support wiring to further speakers in a distributed line.
Protected Bypass Selection
A rear-panel switch selects transformer taps or 8-ohm bypass operation. The bypass selection is protected by a safety screw.
Commercial Audio Applications
The Electro-Voice EVID-S8.2TB surface-mount speaker pair is designed for background and foreground music, paging and sound reinforcement across a range of commercial spaces.
Restaurants, Bars & Patios
Support background music, foreground music and paging in dining areas, bars and outdoor patio spaces.
Retail & Hospitality
Provide music and paging in retail stores and hospitality venues using a surface-mount speaker system.
Fitness & Leisure Venues
Use the EVID-S8.2TB for music and sound reinforcement in fitness clubs, theme parks and leisure venues.
