Mixer Amplifier
Bosch PLE‑2MA120‑EU 2-zone 120W Plena Mixer Amplifier
Personalized settings
Detachable label where the user can write the names for inputs
Indicate preferred settings on the front panel
Loudspeaker Output
Max / rated PLE-2MA120-EU 180 W / 120 W
Loudspeaker output 8 ohm : 31 V (120 W)
Zone
Mixer Amplifier has two zone outputs. Announcements from the both PLE-2CS two-zone call station or tel/100 V input are routed to zone 1 or zone 2 or both.
Performance
Frequency response: 50 Hz to 20 kHz (+1/‑3 dB @ ‑10 dB ref. rated output)
Distortion: <1% @ rated output power, 1 kHz, Low Control Max -12/+12 dB (frequency is setting dependent) Hi Control Max -12/+12 dB (frequency is setting dependent)
Microphone and line inputs
6 microphone/line inputs plus 3 music source inputs, PTT (Push to Talk)
Power
Voltage 115 - 230 VAC ±10%, 50/60 Hz, Inrush Current: 8/16 A (230/115 VAC), 400VA, Battery power supply Voltage 24 VDC, +10% / -15%, Current PLE-2MA120-EU 6 A
Tone Controls
Tone controls provide separate control for mic/line inputs and music inputs so that the voice on the microphones can be specifically optimized for excellent speech.
Music inputs
Separate music inputs are available with their own input selector and volume control. Desired sound for the music source separate from the mic/line inputs.
Controls and Indicators
On/off switch, Power on LED, LED VU meter for master output, Master volume knob
Six volume knobs for microphone inputs, Knob for treble level, Knob for bass level
Headphone socket, Two zone selector buttons, BGM button, Chime level
|
Mains Power Supply |
|
|
Voltage |
115 - 230 VAC ±10%, 50/60 Hz |
|
Inrush Current PLE-2MA120-EU |
8/16 A (230/115 VAC) |
|
Battery Power Supply |
|
|
Voltage |
24 VDC, +10% / -15% |
|
Current PLE-2MA120-EU |
6 A |
|
Charge current |
0.5 ADC |
|
Charge float voltage |
27.3 VDC |
|
Power Consumption |
|
|
PLE-2MA120-EU (mains) |
400 VA |
|
Performance |
|
|
Frequency response |
50 Hz to 20 kHz (+1/‑3 dB @ ‑10 dB ref. rated output) |
|
Distortion |
<1% @ rated output power, 1 kHz |
|
Low Control |
Max -12/+12 dB (frequency is setting dependent) |
|
High Control |
Max -12/+12 dB (frequency is setting dependent) |
|
RJ-45 Inputs |
2x |
|
Call station input |
For PLE-2CS(MM) |
|
Wall panel input |
For PLE-WP3S2Z |
|
Mic/line input |
6x |
|
Input 1 (Push-to-talk contact with ducking functionality) |
5-pin Euro style, balanced, phantom 3-pin XLR, balanced, phantom |
|
Input 2-6 (VOX with ducking functionality on input 2) |
3-pin XLR, balanced, phantom |
|
Sensitivity |
1 mV (mic); 1 V (line) |
|
Impedance |
>1 kohm (mic); >5 kohm (line) |
|
S/N (flat at max volume) |
63 dB |
|
S/N (flat at min volume/muted) |
>5 dB |
|
Dynamic range |
93 dB |
|
S/N (flat at max volume) |
>63 dB (mic); >70 dB (line) |
|
S/N (flat at min volume/muted) |
>75 dB |
|
CMRR (mic) |
>40 dB (50 Hz to 20 kHz) |
|
Headroom |
>17 dB |
|
Speech filter |
-3 dB @ 315 Hz, high-pass, 6 dB/oct |
|
Phantom power supply |
16 V via 1.2 kohm (mic) |
|
Speech filter |
-3 dB @ 315 Hz, high-pass, 6 dB/oct |
|
VOX (input 1 & 2) |
attack time 150 ms; release time 2 s |
|
Music inputs |
3x |
|
Connector |
Cinch, stereo converted to mono |
|
Sensitivity |
300 mV |
|
Impedance |
22 kohm |
|
S/N (flat at max volume) |
>70 dB |
|
S/N (flat at min volume/muted) |
>75 dB |
|
Headroom |
>25 dB |
|
Emergency / Telephone |
1x |
|
Connector |
7-pin, Euro style pluggable screw terminal |
|
Sensitivity tel |
1 V maximum |
|
Sensitivity 100V |
100 V maximum |
|
Impedance |
>10 kohm |
|
S/N (flat at max volume) |
>65 dB |
|
VOX |
threshold 50 mV; attack time 150 ms; release time 2 s |
|
Insert |
1x |
|
Connector |
Cinch |
|
Nominal Level |
1V |
|
Impedance |
>10 kohm |
|
Master/music output |
1x |
|
Connector |
3-pin XLR, balanced |
|
Nominal level |
1 V |
|
Impedance |
<100 ohm |
|
Loudspeaker output 100 V* |
|
|
Connector |
Screw, floating |
|
Max / rated |
180 W / 120 W |
|
Loudspeaker output 8 ohm* |
|
|
Connector |
Euro style pluggable screw terminal |
*Subtract 1 dB for 24 V battery operation Mechanical |
|
|
Dimensions (H x W x D) |
100 x 430 x 270 mm (19" wide, 2U high) |
|
Mounting |
Stand-alone, 19" rack |
|
Color |
Charcoal |
|
Weight |
|
|
Weight |
Approx. 10.5 kg |
|
Environmental |
|
|
Operating temperature |
-10 ºC to +45 ºC |
|
Storage temperature |
-40 ºC to +70 ºC |
|
Relative humidity |
<95% |
|
Acoustic noise level of fan |
<33 dB SPL @ 1m temperature controlled |
EVID-S8.2TB: Product FAQs
The Electro-Voice EVID-S8.2TB is an 8-inch two-way surface-mount speaker supplied as a black pair. It is designed for background and foreground music, paging and sound reinforcement in restaurants, retail stores, fitness clubs and hospitality venues.
Yes. Its built-in 60 W transformer supports 70 V and 100 V systems, with selectable 15 W, 30 W and 60 W taps. A 7.5 W tap is available for 70 V systems only. An 8-ohm bypass also supports low-impedance operation.
Yes. The EVID-S8.2TB has an IP54-rated enclosure for indoor and outdoor applications. Its included mounting system supports wall or ceiling installation, with 90° horizontal and 45° vertical adjustment.
The EVID-S8.2TB comes with a pre-assembled mounting system for wall or ceiling installation. It allows 90° horizontal and 45° vertical adjustment to position the speakers. Mounting brackets and a 5 mm Allen wrench are included.
ESCO (Electronic Security Company) is an official Electro-Voice dealer in Pakistan.