DeepinView Facial Recognition Camera
Hikvision iDS-2CD7A86G2-IZHS 8MP DeepinView Moto Varifocal Bullet Camera
Face Recognition
With embedded deep learning based algorithms, the camera is able to give the best shot of a target face through detecting, capturing, grading and selecting.
Frame Rate
Monitoring mode: 50 Hz: up to 50 fps (3840 × 2160, 3072 × 1728, 2688 × 1520, 1280 × 720), up to 100 fps (1920 × 1080)
On/Off Duty Detection
Equipped with deep learning, supports absence detection & on/off duty monitoring, tracking status & changes in the number of people in a predefined area.
Hard Hat Detection
With the embedded deep learning algorithms, the camera detects the persons in the specified region. It detects whether the person is wearing a hard hat, and reports an alarm if not.
Interface
Built-in memory card slot, Audio I/O, Alarm I/O, Monitoring: 60 m IR Range
Perimeter Protection
With Deep learning based target detection & classification, the camera carries out the duty of perimeter protection, line crossing, intrusion, region entrance & exiting.
Queue Management
With embedded deep learning based algorithms, the camera detects queuing-up people number and waiting time of each person.
Heat Map
The camera can generate a graphic description of visits (by calculating amount of people or amount of dwell time) in a configured area.
Regional People Counting
The camera, with embedded deep learning, supports people density detection and uploads data based on schedule, & changes in crowd size, or congestion levels uploading.
|
Camera |
|
|
Image Sensor |
1/1.8" Progressive Scan CMOS |
|
Max. Resolution |
3840 × 2160 |
|
Min. Illumination |
Color: 0.0005 Lux @ (F1.2, AGC ON), B/W: 0.0001 Lux @ (F1.2, AGC ON), B/W: 0 Lux with IR |
|
Shutter Time |
1 s to 1/100,000 s |
|
Day & Night |
IR cut filter, Blue glass module (less ghost phenomenon) |
|
Lens |
|
|
Focal Length & FOV |
Horizontal FOV 104° to 41.2° |
|
Focus |
Auto, Semi-auto, Manual |
|
Iris Type |
P-iris |
|
Aperture |
2.8 to 12 mm: F1.38 to F2.53 |
|
DORI |
|
|
DORI |
Wide: 2.8 to 12 mm: D (Detect): 87m, O (Observe): 34.5m, R (Recognize): 17.4 m, I (Identify): 8.7m |
|
Illuminator |
|
|
Supplement Light Type |
IR |
|
Supplement Light Range |
2.8 to 12 mm: Monitoring: 60 m |
|
Smart Supplement Light |
Yes |
|
IR Wavelength |
850 nm |
|
Video |
|
|
Main Stream |
Monitoring mode: 50 Hz: up to 50 fps (3840 × 2160, 3072 × 1728, 2688 × 1520, 1280 × 720), up to 100 fps (1920 × 1080) 60 Hz: up to 60 fps (3840 × 2160, 3072 × 1728, 2688 × 1520, 1280 × 720), up to 120 fps (1920 × 1080) *High frame rate is supported under monitoring mode only. 50 Hz: 25 fps (3840 × 2160, 3072 × 1728, 2688 × 1520, 1920 × 1080, 1280 × 720) |
|
Sub-Stream |
50 Hz: 25 fps (1280 × 720, 704 × 576, 640 × 480) 60 Hz: 30 fps (1280 × 720, 704 × 480, 640 × 480) |
|
Third Stream |
50 Hz: 25 fps (1920 × 1080, 1280 × 720, 704 × 576, 640 × 480) 60 Hz: 30 fps (1920 × 1080, 1280 × 720, 704 × 480, 640 × 480) |
|
Fourth Stream |
50 Hz: 25 fps (704 × 576, 640 × 480) |
|
Fifth Stream |
50 Hz: 25 fps (704 × 576, 640 × 480) 60 Hz: 30 fps (704 × 480, 640 × 480) |
|
Video Compression |
Main stream: H.265+ / H.265 / H.264+ / H.264, Sub-stream: H.265 / H.264 / MJPEG, Third stream: H.265 / H.264, Fourth stream: H.265 / H.264 / MJPEG, Fifth stream: H.265 / H.264 / MJPEG |
|
Video Bit Rate |
32 Kbps to 8 Mbps |
|
H.264 Type |
Baseline Profile, Main Profile, High Profile |
|
H.265 Type |
Main Profile |
|
Bit Rate Control |
CBR, VBR |
|
Scalable Video Coding (SVC) |
H.264 & H.265 encoding |
|
Region of Interest (ROI) |
4 fixed regions for each stream |
|
Target Cropping |
Yes |
|
e-PTZ |
Support Patrol and Auto Tracking settings |
|
Network |
|
|
Protocols |
TCP/IP, ICMP, HTTP, HTTPS, FTP, SFTP, DHCP, DNS, DDNS, SRTP, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv4, IPv6, UDP, Bonjour, SSL/TLS, ARP, WebSocket, WebSockets |
|
User/Host |
Up to 32 users 3 user levels: administrator, operator, and user |
|
Security |
Password protection, complicated password, HTTPS encryption, 802.1X authentication (EAP-TLS, EAP-LEAP, EAP-MD5), watermark, IP address filter, basic and digest authentication for HTTP/HTTPS, WSSE and digest authentication for Open Network Video Interface, RTP/RTSP OVER HTTPS, Control Timeout Settings, Security Audit Log, TLS 1.2, TLS 1.3, TPM 2.0 (FIPS 140-2 level 2), AES128/256 |
|
Network Storage |
NAS (NFS, SMB/CIFS), Auto Network Replenishment (ANR), Together with high-end Hikvision memory card, memory card encryption and health detection are supported. |
|
Image |
|
|
Image Parameters Switch |
Yes |
|
Image Settings |
Rotate mode, saturation, brightness, contrast, sharpness, white balance, AGC, adjustable by client software or web browser |
|
Day/Night Switch |
Day, Night, Auto, Schedule, Alarm Trigger |
|
Wide Dynamic Range (WDR) |
140 dB |
|
Image Enhancement |
BLC, HLC, 3D DNR, Distortion Correction, Defog |
|
SNR |
≥ 52 dB |
|
Privacy Mask |
8 programmable polygon privacy masks |
|
Picture Overlay |
LOGO picture can be overlaid on video with 128 × 128 24-bit bmp format. |
|
Image Stabilization |
EIS |
|
Interface |
|
|
Video Output |
1 Vp-p Composite Output (75 Ω/CVBS) (Only for debugging) |
|
Ethernet Interface |
1 RJ45 10 M/100 M/1000 M self-adaptive Ethernet port |
|
On-Board Storage |
Built-in memory card slot, support microSD / microSDHC / microSDXC card, up to 1 TB |
|
Alarm |
2 inputs, 2 outputs (max. 24 VDC/24 VAC, 1 A) |
|
Audio |
1 input (line in), 3.5 mm connector, three-contact, max. input amplitude: 3.3 Vpp, input impedance: 4.7 KΩ, interface type: non-equilibrium, 1 output (line out), 3.5 mm connector, three-contact, max. output amplitude: 3.3 Vpp, output impedance: 100 Ω, interface type: non-equilibrium, mono sound |
|
Event |
|
|
Basic Event |
Motion detection (support alarm triggering by specified target types (human and vehicle)), video tampering alarm, video quality diagnosis, exception (network disconnected, IP address conflict, illegal login, abnormal restart, HDD full, HDD error), vibration detection |
|
Smart Event |
scene change detection, audio exception detection, defocus detection |
|
Linkage |
Upload to FTP / NAS / memory card, notify surveillance center, send email, trigger alarm output, trigger recording, trigger capture, audible warning |
|
Deep Learning Function |
|
|
Multi-target-type Detection |
Supports simultaneous detection and capture of human body, face, and vehicle, Gets 7 face features, Gets 13 human body features, Gets 2 vehicle features, Supports counting the number of line crossing targets by type, including human body, non-motor vehicle, motor vehicle, Supports dynamic mosaic mask |
|
Face Capture |
Detects up to 120 faces simultaneously, captures up to 40 face pictures per frame simultaneously and uploads up to 10 face pictures per second, Supports swing left and right from -60° to 60°, tilt up and down from -30° to 30°, Uploads face with background and closed-up face pictures, Supports best shot and quick shot for capture mode, Supports dynamic mosaic mask, Gets 7 face features |
|
Face Comparison |
Up to 10 face libraries. 30,000 faces for each library. 150,000 faces in total, Supports face library encryption |
|
People Counting |
Supports Multi-Dimension People Counting, Supports counting, displaying and exporting the people flow data of entering, exiting and passing by (The data is stored in the flash.), Supports real-time uploading and uploading by statistic cycle, Supports generating daily, weekly, monthly or annually reports, Supports dynamic deduplication based on face picture comparison, and can filter out the target with the same custom face pictures, same attributes, or filter out repeated invalid targets within the set time interval, Supports face feature deduplication, supports people flow data replenishment |
|
Queue Management |
Supports up to 8 detection regions, and independent arming schedule and linkage method Supports 2 detection modes: regional people queuing-up, waiting time detection Generates reports to compare the efficiency of different queuing-ups and display the changing status of one queue Supports raw data export for further analysis Supports real-time data uploading and scheduled data uploading Regional people queuing-up: supports 4 alarm trigger conditions, including greater than threshold, less than threshold, equal to threshold, not equal to threshold Waiting time detection: supports 1 alarm trigger condition, including greater than threshold |
|
Heat Map |
A graphic description of visits (by calculating amount of people or amount of dwell time) in a configured area., Two report types are available, space heat map and time heat map line chart. |
|
Perimeter Protection |
Line crossing, intrusion, region entrance, region exiting Support alarm triggering by specified target types (human and vehicle) Support combined event alarm triggering |
|
Hard Hat Detection |
Detects up to 30 human targets simultaneously Supports up to 4 shield regions |
|
Metadata |
Intrusion detection, line crossing detection, region entrance detection, region exiting detection, face capture, multi-target-type detection |
|
Regional People Counting |
Supports up to 8 detection regions, and independent arming schedule and linkage method Supports 3 detection modes: people density detection, number of people exception detection, waiting time exception detection Supports parameter settings: alarm times per exception, alarm interval, first alarm delay Supports searching real-time number of people People density detection: supports scheduled uploading, number of people change uploading, congestion level uploading Number of people exception detection: supports 6 alarm trigger conditions, including greater than threshold A, less than threshold A, equal to threshold A, not equal to threshold A, greater than threshold A and less than threshold B, less than threshold A or greater than threshold B (threshold A should be less than threshold B) Waiting time exception detection: supports 3 alarm trigger conditions, including greater than threshold A, less than threshold A, greater than threshold A and less than threshold B (threshold A should be less than threshold B) |
|
On/Off Duty Detection |
Supports up to 8 detection regions, and independent arming schedule and linkage method Supports 2 detection modes: absence detection, on/off duty detection Supports parameter settings: person on duty, absence duration |
|
General |
|
|
Material |
Aluminum alloy body |
|
Dimension |
Without -Y: Ø144.1 mm × 374.7 mm (Ø5.7" × 14.8") |
|
Package Dimension |
425 mm × 190 mm × 180 mm (16.7" × 7.5" × 7.1") |
|
Weight |
Approx. 2170 g (4.78 lb.) |
|
With Package Weight |
Without -Y: Approx. 3364 g (7.42 lb.) |
|
Storage Conditions |
-40 °C to 65 °C (-40 °F to 149 °F). Humidity 95% or less (non-condensing) |
|
Startup and Operating Conditions |
-40 °C to 65 °C (-40 °F to 149 °F). Humidity 95% or less (non-condensing) |
|
Heater |
Yes |
|
Demist |
Yes |
|
Approval |
|
|
EMC |
CE-EMC: EN 55032: 2015+A1: 2020, EN 50130-4: 2011+A1: 2014, EN IEC 61000-3-2: 2019+A1: 2021, EN 61000-3-3: 2013+A1: 2019+A2: 2021, RCM: AS/NZS CISPR 32: 2015, IC: ICES-003: Issue 7, KC: KN32: 2015, KN35: 2015 |
|
Safety |
CB: IEC 62368-1: 2014+A11, CE-LVD: EN 62368-1: 2014/A11: 2017, BIS: IS 13252 (Part 1): 2010/IEC 60950-1: 2005, LOA: IEC/EN 60950-1 |
|
Environment |
CE-RoHS: 2011/65/EU, WEEE: 2012/19/EU, Reach: Regulation (EC) No 1907/2006 |
|
Protection |
IP67: IEC 60529-2013, IK10: IEC 62262:2002 |
|
Other |
PVC FREE |
EVID-S8.2TB: Product FAQs
The Electro-Voice EVID-S8.2TB is an 8-inch two-way surface-mount speaker supplied as a black pair. It is designed for background and foreground music, paging and sound reinforcement in restaurants, retail stores, fitness clubs and hospitality venues.
Yes. Its built-in 60 W transformer supports 70 V and 100 V systems, with selectable 15 W, 30 W and 60 W taps. A 7.5 W tap is available for 70 V systems only. An 8-ohm bypass also supports low-impedance operation.
Yes. The EVID-S8.2TB has an IP54-rated enclosure for indoor and outdoor applications. Its included mounting system supports wall or ceiling installation, with 90° horizontal and 45° vertical adjustment.
The EVID-S8.2TB comes with a pre-assembled mounting system for wall or ceiling installation. It allows 90° horizontal and 45° vertical adjustment to position the speakers. Mounting brackets and a 5 mm Allen wrench are included.
ESCO (Electronic Security Company) is an official Electro-Voice dealer in Pakistan.
Built for Commercial Audio Installation
The Electro-Voice EVID-S8.2TB combines a paintable, fire-rated ABS enclosure with a zinc-plated, powder-coated grille. Connections through the wall-mounted bracket help conceal wiring, while removable locking Euroblock connectors support additional speakers on a distributed line. Its rotatable grille logo accommodates horizontal positioning, and the EVID-S range is designed to work alongside other EVID ceiling and in-wall speakers.
Paintable ABS Enclosure
The fire-rated ABS enclosure can be painted to match the installation décor. The EVID-S8.2TB comes in black RAL 9004.
Corrosion-Resistant Grille
A zinc-plated, powder-coated grille provides corrosion resistance as part of the speaker’s weather-resistant construction.
Concealed Wall-Bracket Wiring
Electrical connections pass through the wall-mounted portion of the mounting system, allowing wiring to remain hidden for a clean installation.
Quick-Attach Mounting
The ball-and-socket mounting system features quick attachment and detachment, with the support bracket integrated into the enclosure.
Locking Euroblock Connections
Removable locking 4-pin Euroblock connectors provide an additional connection option and support wiring to further speakers in a distributed line.
Protected Bypass Selection
A rear-panel switch selects transformer taps or 8-ohm bypass operation. The bypass selection is protected by a safety screw.
Commercial Audio Applications
The Electro-Voice EVID-S8.2TB surface-mount speaker pair is designed for background and foreground music, paging and sound reinforcement across a range of commercial spaces.
Restaurants, Bars & Patios
Support background music, foreground music and paging in dining areas, bars and outdoor patio spaces.
Retail & Hospitality
Provide music and paging in retail stores and hospitality venues using a surface-mount speaker system.
Fitness & Leisure Venues
Use the EVID-S8.2TB for music and sound reinforcement in fitness clubs, theme parks and leisure venues.
