Camera
Hikvision iDS-2CD7A26G0/P-IZHS 2MP DeepinView ANPR Varifocal Bullet Camera
License Plate Recognition
With embedded deep learning based license plate capture and recognition algorithms, the camera alone can achieve plate capture and recognition
Frame Rate
50 Hz: 25 fps (1920 × 1080, 1280 × 720)
60 Hz: 30 fps (1920 × 1080, 1280 × 720)
IR Range
Up to 50m IR Range
On-Board Storage
Built-in memory card slot, support microSD/microSDHC/microSDXC card, up to 1TB
Perimeter Protection
Line crossing, intrusion, region entrance, region exiting
Support alarm triggering by specified target types
Road Traffic and Vehicle Detection
Blocklist and Allow list: up to 10,000 records, Support license plate recognition of motorcycles (only in checkpoint scenario)
Protection
Water and Dust Resistant (IP67) and Vandal Proof (IK10)
|
Camera |
|
|
Image Sensor |
1/1.8" Progressive Scan CMOS |
|
Max. Resolution |
1920 × 1080 |
|
Min. Illumination |
Color: 0.0005 Lux @ (F1.2, AGC ON); B/W: 0.0001 Lux @ (F1.2, AGC ON), 0 Lux with IR |
|
Shutter Time |
1 s to 1/100,000 s |
|
Day & Night |
IR cut filter Blue glass module to reduce ghost phenomenon |
|
Lens |
|
|
Focal Length & FOV |
2.8 to 12 mm, horizontal FOV: 114.5° to 41.8°, vertical FOV: 59.3° to 23.6°, diagonal FOV: 141.1° to 48°
|
|
Focus |
Auto, semi-auto, manual |
|
Iris Type |
P-iris |
|
Aperture |
2.8 to 12 mm: F1.2 to F2.5 |
|
DORI |
|
|
DORI |
Wide: 2.8 to 12 mm: D: 45 m, O: 17.9 m, R: 9 m, I: 4.5 m Tele: 2.8 to 12 mm: D: 111.8 m, O: 44.3 m, R: 22.4 m, I: 11.2 m |
|
Illuminator |
|
|
Supplement Light Type |
IR |
|
Supplement Light Range |
2.8 to 12 mm: 50 m |
|
Smart Supplement Light |
Yes |
|
IR Wavelength |
850 nm |
|
Video |
|
|
Main Stream |
50 Hz: 25 fps (1920 × 1080, 1280 × 720) 60 Hz: 30 fps (1920 × 1080, 1280 × 720) |
|
Sub-Stream |
50 Hz: 25 fps (704 × 576, 640 × 480) 60 Hz: 30 fps (704 × 480, 640 × 480) |
|
Third Stream |
50 Hz: 25 fps (1920 × 1080, 1280 × 720, 704 × 576, 640 × 480) 60 Hz: 30 fps (1920 × 1080, 1280 × 720, 704 × 480, 640 × 480) |
|
Fourth Stream |
50 Hz: 25 fps (1920 × 1080, 1280 × 720, 704 × 576, 640 × 480) 60 Hz: 30 fps (1920 × 1080, 1280 × 720, 704 × 480, 640 × 480) |
|
Fifth Stream |
50 Hz: 25 fps (704 × 576, 640 × 480) 60 Hz: 30 fps (704 × 480, 640 × 480) |
|
Video Compression |
Main stream: H.265+ / H.265 / H.264+ / H.264, Sub-stream: H.265 / H.264 / MJPEG, Third stream: H.265 / H.264, Fourth stream: H.265 / H.264 / MJPEG, Fifth stream: H.265 / H.264 / MJPEG |
|
Video Bit Rate |
32 Kbps to 8 Mbps |
|
H.264 Type |
Baseline Profile, Main Profile, High Profile |
|
H.265 Type |
Main Profile |
|
Bit Rate Control |
CBR, VBR |
|
Scalable Video Coding (SVC) |
H.265 and H.264 encoding |
|
Region of Interest (ROI) |
4 fixed regions for each stream |
|
Target Cropping |
Yes |
|
Network |
|
|
Protocols |
TCP/IP, ICMP, HTTP, HTTPS, FTP, SFTP, SRTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP,UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, UDP, Bonjour, SSL/TLS, WebSocket, WebSockets |
|
Security |
Password protection, complicated password, HTTPS encryption, 802.1X authentication (EAP-TLS, EAP-LEAP, EAP-MD5), watermark, IP address filter, basic and digest authentication for HTTP/HTTPS, WSSE and digest authentication for Open Network Video Interface, RTP/RTSP OVER HTTPS, Control Timeout Settings, Security Audit Log, TLS 1.2 |
|
Network Storage |
NAS (NFS, SMB/CIFS), auto network replenishment (ANR) Together with high-end Hikvision memory card, memory card encryption and health detection are supported |
|
Image |
|
|
Image Parameters Switch |
Yes |
|
Image Settings |
Saturation, brightness, contrast, sharpness, gain, white balance adjustable by client software or web browser |
|
Day/Night Switch |
Day, Night, Auto, Schedule, Alarm Trigger, Video Trigger |
|
Wide Dynamic Range (WDR) |
140 dB |
|
SNR |
≥ 52 dB |
|
Image Enhancement |
BLC, HLC, Defog, 3D DNR |
|
Picture Overlay |
LOGO picture can be overlaid on video with 128 × 128 24bit bmp format |
|
Image Stabilization |
EIS |
|
Interface |
|
|
Video Output |
1 Vp-p Composite Output (75 Ω/CVBS) (Only for debugging) |
|
Ethernet Interface |
1 RJ45 10 M/100 M/1000 M self-adaptive Ethernet port |
|
On-Board Storage |
Built-in memory card slot, support microSD / microSDHC / microSDXC card, up to 1 TB |
|
Alarm |
2 input, 2 outputs (max. 24 VDC, 1 A) |
|
Reset Key |
Yes |
|
Event |
|
|
Basic Event |
Motion detection, video tampering alarm, exception (network disconnected, IP address conflict, illegal login, abnormal reboot, HDD full, HDD error), video quality diagnosis, vibration detection |
|
Smart Event |
Line crossing detection, intrusion detection, region entrance detection, region exiting detection, audio exception detection, scene change detection, defocus detection |
|
Linkage |
Upload to FTP/NAS/memory card, notify surveillance center, send email, trigger alarm output, trigger recording, trigger capture, audible warning |
|
Deep Learning Function |
|
|
Perimeter Protection |
Line crossing, intrusion, region entrance, region exiting Support alarm triggering by specified target types |
|
Road Traffic and Vehicle Detection |
Blocklist and allowlist: up to 10,000 records Support license plate recognition of motorcycles (only in checkpoint scenario) Support vehicle attribute detection, including vehicle type, color, brand, etc. (City Street mode is recommended.) License plate recognition rate ≥98% |
|
General |
|
|
Power |
12 VDC ± 20%, 1.19 A, max. 14.28 W, three-core terminal block PoE: 802.3at, Type 2, Class 4, 42.5 V to 57 V, 0.396 A to 0. 295 A, max. 16.8 W |
|
Material |
Aluminum alloy body |
|
Dimension |
Without -Y: Ø144 × 347 mm (Ø5.7" × 13.7") With -Y: Ø140 × 351 mm (Ø5.5" × 13.8") |
|
Package Dimension |
405 × 190 × 180 mm (15.9" × 7.5" × 7.1") |
|
Weight |
Approx. 1950 g (4.2 lb.) |
|
With Package Weight |
Approx. 3070 g (6.7 lb.) |
|
Storage Conditions |
-30 °C to 60 °C (-22 °F to 140 °F). Humidity 95% or less (non-condensing) |
|
General Function |
Anti-flicker, 5 streams, EPTZ, heartbeat, mirror, privacy mask, flash log, password reset via email, pixel counter |
|
Heater |
Yes |
|
Approval |
|
|
EMC |
FCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN 61000-3-2:2019, EEN 61000-3-3:2013+A1:2019, EN 50130-4: 2011 +A1: 2014); RCM (AS/NZS CISPR 32: 2015); IC (ICES-003: Issue 7); KC (KN 32: 2015, KN 35: 2015) |
|
Safety |
UL (UL 62368-1); CB (IEC 62368-1:2014+A11); CE-LVD (EN 62368-1:2014/A11:2017); BIS (IS 13252(Part 1):2010/ IEC 60950-1 : 2005); LOA (IEC/EN 60950-1) |
|
Environment |
CE-RoHS (2011/65/EU); WEEE (2012/19/EU); Reach (Regulation (EC) No 1907/2006) |
|
Protection |
IK10 (IEC 62262:2002), IP67 (IEC 60529-2013) |
EVID-S8.2TB: Product FAQs
The Electro-Voice EVID-S8.2TB is an 8-inch two-way surface-mount speaker supplied as a black pair. It is designed for background and foreground music, paging and sound reinforcement in restaurants, retail stores, fitness clubs and hospitality venues.
Yes. Its built-in 60 W transformer supports 70 V and 100 V systems, with selectable 15 W, 30 W and 60 W taps. A 7.5 W tap is available for 70 V systems only. An 8-ohm bypass also supports low-impedance operation.
Yes. The EVID-S8.2TB has an IP54-rated enclosure for indoor and outdoor applications. Its included mounting system supports wall or ceiling installation, with 90° horizontal and 45° vertical adjustment.
The EVID-S8.2TB comes with a pre-assembled mounting system for wall or ceiling installation. It allows 90° horizontal and 45° vertical adjustment to position the speakers. Mounting brackets and a 5 mm Allen wrench are included.
ESCO (Electronic Security Company) is an official Electro-Voice dealer in Pakistan.
Built for Commercial Audio Installation
The Electro-Voice EVID-S8.2TB combines a paintable, fire-rated ABS enclosure with a zinc-plated, powder-coated grille. Connections through the wall-mounted bracket help conceal wiring, while removable locking Euroblock connectors support additional speakers on a distributed line. Its rotatable grille logo accommodates horizontal positioning, and the EVID-S range is designed to work alongside other EVID ceiling and in-wall speakers.
Paintable ABS Enclosure
The fire-rated ABS enclosure can be painted to match the installation décor. The EVID-S8.2TB comes in black RAL 9004.
Corrosion-Resistant Grille
A zinc-plated, powder-coated grille provides corrosion resistance as part of the speaker’s weather-resistant construction.
Concealed Wall-Bracket Wiring
Electrical connections pass through the wall-mounted portion of the mounting system, allowing wiring to remain hidden for a clean installation.
Quick-Attach Mounting
The ball-and-socket mounting system features quick attachment and detachment, with the support bracket integrated into the enclosure.
Locking Euroblock Connections
Removable locking 4-pin Euroblock connectors provide an additional connection option and support wiring to further speakers in a distributed line.
Protected Bypass Selection
A rear-panel switch selects transformer taps or 8-ohm bypass operation. The bypass selection is protected by a safety screw.
Commercial Audio Applications
The Electro-Voice EVID-S8.2TB surface-mount speaker pair is designed for background and foreground music, paging and sound reinforcement across a range of commercial spaces.
Restaurants, Bars & Patios
Support background music, foreground music and paging in dining areas, bars and outdoor patio spaces.
Retail & Hospitality
Provide music and paging in retail stores and hospitality venues using a surface-mount speaker system.
Fitness & Leisure Venues
Use the EVID-S8.2TB for music and sound reinforcement in fitness clubs, theme parks and leisure venues.
