Camera
Hikvision iDS-2CD7A26G0-IZHS 2MP DeepinView Darkfighter Varifocal Camera
IR Range
Up to 50m IR Range
Face Recognition
With embedded deep learning based algorithms, the camera is able to give the best shot of a target face through detecting, capturing, grading and selecting.
Frame Rate
50 Hz: 50 fps (1920 × 1080, 1280 × 960, 1280× 720)
60 Hz: 60 fps (1920 × 1080, 1280 × 960, 1280× 720)
On-Board Storage
Built-in memory card slot, support microSD/microSDHC/microSDXC card, up to 1TB
Multi-Target-Type Detection
Camera detects & captures the face, human body, vehicle in the specified region
Perimeter Protection
With Deep learning based target detection & classification, the camera carries out the duty of perimeter protection, line crossing, intrusion, region entrance & exiting.
Queue Management
With embedded deep learning based algorithms, the camera detects queuing-up people number and waiting time of each person.
|
Camera |
|
|
Image Sensor |
1/1.8" Progressive Scan CMOS |
|
Max. Resolution |
1920 × 1080 |
|
Min. Illumination |
Color: 0.0005 Lux @ (F1.2, AGC ON); B/W: 0.0001 Lux @ (F1.2, AGC ON), 0 Lux with IR |
|
Shutter Time |
1 s to 1/100,000 s |
|
Day & Night |
IR cut filter Blue glass module to reduce ghost phenomenon |
|
Lens |
|
|
Focal Length & FOV |
2.8 to 12 mm, horizontal FOV: 114.5° to 41.8°, vertical FOV: 59.3° to 23.6°, diagonal FOV: 141.1° to 48° |
|
Focus |
Auto, semi-auto, manual |
|
Iris Type |
P-iris |
|
Aperture |
2.8 to 12 mm: F1.2 to F2.5 |
|
DORI |
|
|
DORI |
Wide: 2.8 to 12 mm: D: 45 m, O: 17.9 m, R: 9 m, I: 4.5 m Tele: 2.8 to 12 mm: D: 111.8 m, O: 44.3 m, R: 22.4 m, I: 11.2 m |
|
Illuminator |
|
|
Supplement Light Type |
IR |
|
Supplement Light Range |
2.8 to 12 mm: 50 m |
|
Smart Supplement Light |
Yes |
|
IR Wavelength |
850 nm |
|
Video |
|
|
Main Stream |
50 Hz: 50 fps (1920 × 1080, 1280 × 960, 1280× 720) 60 Hz: 60 fps (1920 × 1080, 1280 × 960, 1280× 720) |
|
Sub-Stream |
50 Hz: 25 fps (704 × 480, 640 × 480) 60 Hz: 30 fps (704 × 480, 640 × 480) |
|
Third Stream |
50 Hz: 25 fps (1920 × 1080, 1280 × 720, 704 × 480, 640 × 480) 60 Hz: 30 fps (1920 × 1080, 1280 × 720, 704 × 480, 640 × 480) |
|
Fourth Stream |
50 Hz: 25 fps (704 × 480, 640 × 480) 60 Hz: 30 fps (704 × 480, 640 × 480) |
|
Fifth Stream |
50 Hz: 25 fps (704 × 480, 640 × 480) 60 Hz: 30 fps (704 × 480, 640 × 480) |
|
Video Bit Rate |
32 Kbps to 16 Mbps |
|
Video Compression |
Main stream: H.265+ / H.265 / H.264+ / H.264, Sub-stream: H.265 / H.264 / MJPEG, Third stream: H.265 / H.264, Fourth stream: H.265 / H.264 / MJPEG, Fifth stream: H.265 / H.264 / MJPEG |
|
H.264 Type |
Main Profile |
|
H.265 Type |
Baseline Profile, Main Profile, High Profile |
|
Bit Rate Control |
CBR,VBR |
|
Scalable Video Coding (SVC) |
H.264 and H.265 encoding |
|
Region of Interest (ROI) |
4 fixed region(s) for each stream |
|
Target Cropping |
Yes |
|
Network |
|
|
Protocols |
TCP/IP, ICMP, HTTP, HTTPS, FTP, SFTP, SRTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP,UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, UDP, Bonjour, SSL/TLS |
|
User/Host |
Up to 32 users 3 user levels: administrator, operator, and user |
|
Security |
Password protection, complicated password, HTTPS encryption, 802.1X authentication (EAP-TLS, EAP-LEAP, EAP-MD5), watermark, IP address filter, basic and digest authentication for HTTP/HTTPS, WSSE and digest authentication for Open Network Video Interface, RTP/RTSP OVER HTTPS, Control Timeout Settings, Security Audit Log, TLS 1.2 |
|
Network Storage |
NAS (NFS, SMB/CIFS), auto network replenishment (ANR) Together with high-end Hikvision memory card, memory card encryption and health detection are supported. |
|
Image |
|
|
Image Parameters Switch |
Yes |
|
Image Settings |
Saturation, brightness, contrast, sharpness, white balance, and AGC adjustable by client software or web browser |
|
Day/Night Switch |
Day, Night, Auto, Schedule, Alarm Trigger |
|
Wide Dynamic Range (WDR) |
140 dB |
|
SNR |
≥ 52 dB |
|
Image Enhancement |
BLC, HLC, Defog, 3D DNR |
|
Privacy Mask |
8 programmable polygon privacy masks, mask color or mosaic configurable |
|
Image Stabilization |
EIS |
|
Picture Overlay |
LOGO picture can be overlaid on video with 128 × 128 24bit bmp format |
|
Interface |
|
|
Video Output |
1 Vp-p Composite Output (75 Ω/CVBS) (Only for debugging) |
|
Ethernet Interface |
1 RJ45 10 M/100 M/1000 M self-adaptive Ethernet port |
|
On-Board Storage |
Built-in memory card slot, support microSD / microSDHC / microSDXC card, up to 1 TB |
|
Reset Key |
Yes |
|
Power Output |
With -Y: 12 VDC, max. 100 mA |
|
Event |
|
|
Basic Event |
Motion detection, video tampering alarm, exception (network disconnected, IP address conflict, illegal login, abnormal reboot, HDD full, HDD error), video quality diagnosis, vibration detection |
|
Linkage |
Upload to FTP / NAS / memory card, notify surveillance center, send email, trigger alarm output, trigger recording, trigger capture, audible warning |
|
Smart Event |
Line crossing detection, intrusion detection, region entrance detection, region exiting detection, audio exception detection, scene change detection, defocus detection |
|
Deep Learning Function |
|
|
Multi-target-type Detection |
Supports
simultaneous detection and capture of human body, face and vehicle |
|
Face Capture |
Detects up to 60 faces simultaneously Supports swing left and right from -60° to 60°, tilt up and down from -30° to 30° Uploads face with background and closed-up face pictures |
|
Face Comparison |
Up to 10 face libraries. Up to 30,000 faces for each library. 150,000 faces in total. Supports face library encryption |
|
Perimeter Protection |
Line crossing, intrusion, region entrance, region exiting Support alarm triggering by specified target types (human and vehicle) |
|
People Counting |
Supports crossline people counting, Supports counting, displaying and exporting the people flow data of entering and exiting. (The data is stored in the flash.), The real-time people flow data is displayed on the screen, Supports swing left and right from -60° to 60°, tilt up and down from -30° to 30°., Uploads face with background and closed-up face picture., Supports real-time uploading and uploading by statistic cycle |
|
Queue Management |
Supports up to 8 detection regions, and independent arming schedule and linkage method Supports 2 detection modes: regional people queuing-up, waiting time detection Generates reports to compare the efficiency of different queuing-ups and display the changing status of one queue Supports raw data export for further analysis. Supports real-time data uploading and scheduled data uploading Regional people queuing-up: supports 4 alarm trigger conditions, including greater than threshold, less than threshold, equal to threshold, not equal to threshold Waiting time detection: supports 1 alarm trigger condition, including greater than threshold |
|
Heat Map |
A graphic description of visits (by calculating amount of people or amount of dwell time) in a configured area., Two report types are available, space heat map and time heat map line chart. |
|
Hard Hat Detection |
Detects up to 30 human targets simultaneously Supports up to 4 shield regions |
|
Metadata |
Intrusion detection, line crossing detection, region entrance detection, region exiting detection, face capture, multi-target-type detection |
|
Regional People Counting |
Supports up to 8 detection regions, and independent arming schedule and linkage method Supports 3 detection modes: people density detection, number of people exception detection, waiting time exception detection Supports parameter settings: alarm times per exception, alarm interval, first alarm delay Supports searching real-time number of people People density detection: supports scheduled uploading, number of people change uploading, congestion level uploading Number of people exception detection: supports 6 alarm trigger conditions, including greater than threshold A, less than threshold A, equal to threshold A, not equal to threshold A, greater than threshold A and less than threshold B, less than threshold A or greater than threshold B (threshold A should be less than threshold B) Waiting time exception detection: supports 3 alarm trigger conditions, including greater than threshold A, less than threshold A, greater than threshold A and less than threshold B (threshold A should be less than threshold B) |
|
On/Off Duty Detection |
Supports up to 8 detection regions, and independent arming schedule and linkage method Supports 2 detection modes: absence detection, on/off duty detection Supports parameter settings: person on duty, absence duration |
|
General |
|
|
Power |
12 VDC ± 20%, three-core terminal block, 1.19 A, max. 14.28 W PoE: 802.3at, Type 2, Class 4, 42.5 V to 57 V), 0.396 A to 0. 295 A, max. 16.8 W |
|
Material |
Aluminum alloy body |
|
Dimension |
Without -Y: Ø144 × 347 mm (Ø5.7" × 13.7") With -Y: Ø140 × 351 mm (Ø5.5" × 13.8") |
|
Package Dimension |
405 × 190 × 180 mm (15.9" × 7.5" × 7.1") |
|
Weight |
Approx. 1950 g (4.2 lb.) |
|
With Package Weight |
Approx. 3070 g (6.7 lb.) |
|
Startup and Operating Conditions |
-40 °C to 60 °C (-40 °F to 140 °F). Humidity 95% or less (non-condensing) |
|
Storage Conditions |
-30 °C to 60 °C (-22 °F to 140 °F). Humidity 95% or less (non-condensing) |
|
General Function |
Heartbeat, mirror, password protection, watermark, privacy mask, IP address filter, one-key reset, five streams |
|
Heater |
Yes |
|
Approval |
|
|
EMC |
FCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN 61000-3-2:2019, EEN 61000-3-3:2013+A1:2019, EN 50130-4: 2011 +A1: 2014); RCM (AS/NZS CISPR 32: 2015); IC (ICES-003: Issue 7); KC (KN 32: 2015, KN 35: 2015) |
|
Safety |
UL (UL 62368-1); CB (IEC 62368-1:2014+A11); CE-LVD (EN 62368-1:2014/A11:2017); BIS (IS 13252(Part 1):2010/ IEC 60950-1 : 2005); LOA (IEC/EN 60950-1) |
|
Environment |
CE-RoHS (2011/65/EU); WEEE (2012/19/EU); Reach (Regulation (EC) No 1907/2006) |
|
Protection |
IK10 (IEC 62262:2002), IP67 (IEC 60529-2013) |
|
Automotive and Railway |
EN50121-4 |
|
Other |
PVC FREE |
EVID-S8.2TB: Product FAQs
The Electro-Voice EVID-S8.2TB is an 8-inch two-way surface-mount speaker supplied as a black pair. It is designed for background and foreground music, paging and sound reinforcement in restaurants, retail stores, fitness clubs and hospitality venues.
Yes. Its built-in 60 W transformer supports 70 V and 100 V systems, with selectable 15 W, 30 W and 60 W taps. A 7.5 W tap is available for 70 V systems only. An 8-ohm bypass also supports low-impedance operation.
Yes. The EVID-S8.2TB has an IP54-rated enclosure for indoor and outdoor applications. Its included mounting system supports wall or ceiling installation, with 90° horizontal and 45° vertical adjustment.
The EVID-S8.2TB comes with a pre-assembled mounting system for wall or ceiling installation. It allows 90° horizontal and 45° vertical adjustment to position the speakers. Mounting brackets and a 5 mm Allen wrench are included.
ESCO (Electronic Security Company) is an official Electro-Voice dealer in Pakistan.
Built for Commercial Audio Installation
The Electro-Voice EVID-S8.2TB combines a paintable, fire-rated ABS enclosure with a zinc-plated, powder-coated grille. Connections through the wall-mounted bracket help conceal wiring, while removable locking Euroblock connectors support additional speakers on a distributed line. Its rotatable grille logo accommodates horizontal positioning, and the EVID-S range is designed to work alongside other EVID ceiling and in-wall speakers.
Paintable ABS Enclosure
The fire-rated ABS enclosure can be painted to match the installation décor. The EVID-S8.2TB comes in black RAL 9004.
Corrosion-Resistant Grille
A zinc-plated, powder-coated grille provides corrosion resistance as part of the speaker’s weather-resistant construction.
Concealed Wall-Bracket Wiring
Electrical connections pass through the wall-mounted portion of the mounting system, allowing wiring to remain hidden for a clean installation.
Quick-Attach Mounting
The ball-and-socket mounting system features quick attachment and detachment, with the support bracket integrated into the enclosure.
Locking Euroblock Connections
Removable locking 4-pin Euroblock connectors provide an additional connection option and support wiring to further speakers in a distributed line.
Protected Bypass Selection
A rear-panel switch selects transformer taps or 8-ohm bypass operation. The bypass selection is protected by a safety screw.
Commercial Audio Applications
The Electro-Voice EVID-S8.2TB surface-mount speaker pair is designed for background and foreground music, paging and sound reinforcement across a range of commercial spaces.
Restaurants, Bars & Patios
Support background music, foreground music and paging in dining areas, bars and outdoor patio spaces.
Retail & Hospitality
Provide music and paging in retail stores and hospitality venues using a surface-mount speaker system.
Fitness & Leisure Venues
Use the EVID-S8.2TB for music and sound reinforcement in fitness clubs, theme parks and leisure venues.
