Mifare card reader for a Hikvision access controller: show the card to open. Connects by RS-485 or Wiegand, IP65. Scroll down for details.

Floor relay board for the DS-K2210 lift controller: each unit switches 16 floor buttons, add one per 16 floors up to 128. Mounts on the DIN rail in the car top box next to the master. Scroll down for details.

Lift access control: the master controller sits on top of the car, a reader inside the car asks for a card, and only the floors that person is allowed to visit light up on the panel. Tenants reach their own floor, cleaners every floor at night, visitors the lobby only. Fire alarm input releases everything. One master with sub-controllers covers 128 floors; managed from HikCentral with the doors. Scroll down for details.

No-touch exit button: wave a hand 40 to 120 mm in front of it to open the door from inside, with nothing to press. Stainless steel panel, green / red LED, door-open delay from 1 to 25 s, fits narrow door frames, 12 VDC. Scroll down for details.

Heavy-duty magnetic lock with 500 kg (1,100 lb) holding force, for main entrances, heavy doors and high-security rooms. Fits wood, glass and metal doors, runs on 12 VDC or 24 VDC, with an LED and a lock status signal output for the access controller or alarm panel. Scroll down for details.

Double door magnetic lock with 272 kg (600 lb) holding force on each door, for glass, wood or metal double doors in offices and shops. Runs on 12 VDC or 24 VDC, has a built-in MOV against voltage spikes and an LED that shows the lock status. Scroll down for details.

Single door magnetic lock with 272 kg (600 lb) holding force, the standard choice for office, shop and room doors. Runs on 12 VDC or 24 VDC, has a built-in MOV against voltage spikes and an LED that shows the lock status. Scroll down for details.

L and Z bracket set for the Hikvision DS-K4H450 500 kg (1,100 lb) magnetic lock (Pro Series). Use it where the lock cannot be fixed straight to the door frame, for example on doors that open inward. Scroll down for details.

Touchless exit button: wave a hand to open the door from inside, with no button to press, so it stays clean in clinics, offices and food areas. Stainless steel panel with an LED indicator, standard 86 × 86 mm size. Scroll down for details.

L and Z bracket set to fit a Hikvision 272 kg (600 lb) magnetic lock on a door that opens inward. The L-bracket holds the lock under the frame and the Z-bracket holds the armature plate on the door. Strong aluminium alloy, sandblasted and hard anodized. Scroll down for details.

L and Z bracket set for the Hikvision DS-K4H258 magnetic lock (Value Series). Use it where the lock cannot be fixed straight to the door frame, for example on doors that open inward. Scroll down for details.

U-bracket that holds the magnetic lock's armature plate on the lower edge of a frameless glass door. Aluminium alloy, hard anodized (Value Series). Scroll down for details.

Electric bolt lock for wood, glass, metal and fire doors: a stainless steel bolt drops into the frame and holds up to 800 kg (1,760 lb) of force. Fail-safe (opens when power is off), with a door status output, adjustable re-lock delay and a photoelectric sensor in place of mechanical switches, rated for 500,000 cycles. Brackets are available for frameless glass doors. Scroll down for details.

Lower U-bracket for the Hikvision DS-K4T100 electric bolt. Scroll down for details.

Upper and lower U-bracket set to mount the Hikvision DS-K4T100 electric bolt on glass doors. Scroll down for details.

U-bracket for the Hikvision DS-K4T108 electric bolt. Scroll down for details.

Exit button with an aluminium alloy panel and metal button, standard 86 × 86 mm size, to open an access-controlled door from inside. Scroll down for details.

Narrow exit button that fits on a door frame: stainless steel panel, metal button and metal back box, 90 × 35 mm, to open an access-controlled door from inside. Scroll down for details.

U-bracket that fixes the armature plate of a DS-K4H250S or DS-K4H250D magnetic lock to a frameless glass door. Scroll down for details.

USB card enrollment station for the admin desk: plug it into the PC with no driver needed and read 13.56 MHz (M1, CPU) and 125 kHz (EM) cards straight into your software. 2 PSAM slots, encrypted data, and an API for developers. Scroll down for details.