Key specs
- 2 x 500 W Class-D, 1,000 W total
- 70 V (10 Ω) or 100 V (20 Ω) floating outputs
- EN 54-16 and EN 54-4 certified
- Mains 115–240 V AC + 24 V DC battery backup
- 4 audio inputs on RJ-45, plus 2 Euroblock inputs
- CAN bus control, ground fault and line monitoring
- 50 Hz – 20 kHz… (see note), S/N > 104 dB
- 2U, 483 x 88 x 375 mm, 16.5 kg
Specifications
General
| Specification | Value |
|---|---|
| Model | PVA-2P500 |
| Order number | F.01U.298.641 |
| Product type | 2-channel power amplifier, voice evacuation |
| System | Bosch PAVIRO |
Output Power & Performance
| Specification | Value |
|---|---|
| Rated output power (1 kHz, THD ≤ 1%) | 2 x 500 W |
| Rated load impedance | 100V: 20 Ω (500 W) / 70V: 10 Ω (500 W) |
| Max RMS voltage swing (1 kHz, THD ≤ 1%, no load) | 100V: 110 V / 70V: 78 V |
| Voltage gain (ref. 1 kHz, fixed) | 70V: 33.2 dB / 100V: 36.2 dB |
| Frequency response (ref. 1 kHz, rated load, -3 dB) | 50 Hz – 25 kHz |
| Signal-to-noise ratio (A-weighted) | > 104 dB |
| Output noise (A-weighted) | < -62 dBu |
| Crosstalk (ref. 1 kHz) | < -85 dB |
| Maximum load capacitance | 2 µF |
| Output stage topology | Class-D, transformer, floating |
Inputs
| Specification | Value |
|---|---|
| Audio inputs | LINE IN 1–4 (RJ-45), LINE IN 1 or 2 (Euroblock, balanced) |
| Rated input voltage | +6 dBu |
| Max input level | +18 dBu (9.75 Vrms) |
| Input impedance (active balanced) | 20 kΩ |
Control & Monitoring
| Specification | Value |
|---|---|
| Control interface | CAN bus, 2 x RJ-45, 10 to 500 kbit/s |
| CAN address | Rear-panel selector switch |
| Ground fault detection | R < 50 kΩ |
| Monitoring | Temperature, watchdog, CAN bus and audio line monitoring; pilot tone and ground fault via PVA-4CR12 or PVA-4R24 |
| Configuration | IRIS-Net software, stored in non-volatile flash memory |
| Front indicators | Signal clip, fault, ground fault, audio signal, network, standby, power |
Power
| Specification | Value |
|---|---|
| Mains supply | 115–240 VAC ±10%, 50/60 Hz |
| Battery supply | 21–32 VDC |
| Power consumption, 230V AC (max -3dB / idle / standby) | 700 W / 21 W / 1.9 W |
| Power consumption, 120V AC (max -3dB / idle / standby) | 745 W / 18 W / 1.5 W |
| Power consumption, 24V DC (max -3dB / idle / standby) | 735 W / 16 W / 1.5 W |
| Inrush current | 2 A (1.3 A after five-second power cycle) |
| Mains fuse | T6.3A (internal) |
| DC fuse | 30A (internal) |
Protection
| Specification | Value |
|---|---|
| Protections | Audio input level limiter, RMS output power limiter, high temperature, DC, short circuit, mains undervoltage, DC supply undervoltage, inrush current limiter, ground fault |
Environmental
| Specification | Value |
|---|---|
| Cooling | Front-to-rear, temperature-controlled fans |
| Operating temperature | -5°C to +45°C (23°F to 113°F) |
| Storage temperature | -40°C to +70°C (-40°F to 158°F) |
| Humidity (non-condensing) | 5% – 90% |
| Altitude | Up to 2000 m |
Mechanical
| Specification | Value |
|---|---|
| Dimensions (H × W × D) | 88 × 483 × 375 mm (2RU) |
| Weight (net) | 16.5 kg |
| Mounting | Standalone; 19" rack |
| Color | Black with silver |
Certifications
| Category | Standard |
|---|---|
| Emergency (Europe) | EN 54-16, EN 54-4 |
| Emergency compliance | BS 5839-8 (UK), ÖNORM F 3033 (Austria) |
| Safety | EN 62368-1 |
| Immunity | EN 50130-4, EN 55103-2 (E1, E2, E3) |
| Emissions | EN 61000-6-3, ICES-003, FCC-47 Part 15B Class A |
| Maritime | EN 60945 |
| Conformity | CE/CPR, FCC, ICES, RCM, KCC, EAC, RoHS |
Parts Included
| Quantity | Component |
|---|---|
| 1 | PVA-2P500 power amplifier |
| 1 | Power cord 230V AC |
| 1 | Power cord 120V AC |
| 1 | Set of connectors |
| 1 | Set of feet |
| 1 | Installation manual |
| 1 | Important safety instructions |
Know before you buy
Quick answers about the PVA-2P500, and how it compares.
Where does the PVA-2P500 fit?
How much power does each channel get?
How many speakers can I connect?
| Speaker tap | Per channel* | Total (2 channels) |
|---|---|---|
| 3 W | About 133 | About 266 |
| 6 W | About 66 | About 132 |
| 10 W | About 40 | About 80 |
| 15 W | About 26 | About 52 |
Does it keep working during a power failure?
Does it need a controller?
What does it monitor?
How is it installed?
How does a PAVIRO system fit together?
Who supplies Bosch PAVIRO in Pakistan, and what warranty do I get?
Electronic Security Company (ESCO) is the only authorized distributor of Bosch, Dynacord and Electro-Voice in Pakistan, so every PAVIRO product we supply is genuine and comes with a 3-year warranty. Warranty is carry-in: bring the unit to an ESCO office and after inspection it is repaired or replaced as needed.
We supply, design and install complete public address and voice evacuation systems for hospitals, airports, shopping malls, hotels, offices and industrial sites, with after-sales service nationwide. Prices are quoted per project: tell us your building, number of zones and fire alarm requirements and we will send a quote.

