Bosch DCNM-FMCP is a flush microphone connection panel designed for the DICENTIS Flush Conference System. It provides a secure connection for compatible DCNM-MICSLS and DCNM-MICSLL pluggable microphones and features integrated shock-mount technology to reduce unwanted table-borne noise. The panel includes a microphone pre-amplifier, supports microphone LED control, and connects through dedicated audio and power interfaces. Supplied in RAL 9017 Traffic Black, the DCNM-FMCP is provided as a single unit with power and audio cables.

Bosch DCNM-FBD2 Dicentis Flush Base Device 2, Standard 2 Participants Mode (up to 4 with with shared microphones and loudspeakers)

The Bosch DCNM-FHHC Hand Held Microphone Coiled is a uni-directional condenser microphone for DICENTIS Flush installations where tabletop space is limited. It features a 1.5 m coiled cable when uncoiled, built-in plop and windshield protection, a request-to-speak button, and red/green LED status indicators. The microphone connects to the DCNM-FAI to become part of a DICENTIS conference system.

Bosch DCNM-FPRIOB is a flush priority button panel designed for the DICENTIS Flush Conference System. It features a dedicated priority on/off button with an integrated LED bar, showing white when it is possible to speak and red when priority is active. The panel connects to the DICENTIS flush base device through RJ12, supports loop-through daisy-chain connection, and is supplied with a 30 cm control cable. Finished in RAL 9017 Traffic Black, the DCNM-FPRIOB is supplied as a single unit.

Bosch DCNM-FLSP is a flush loudspeaker panel designed for use within the DICENTIS Flush Conference System. It features an integrated loudspeaker behind the front grille and connects to the compatible DICENTIS flush base device through a fixed 2 m cable with a 2-pole terminal block. The standard finish is RAL 9017 Traffic Black, and the product is supplied as a single unit.

Bosch DCNM-FMICB is a flush microphone button panel designed for the DICENTIS Flush Conference System. It provides clear microphone status indication through an integrated LED bar, showing red when the microphone is active, green when the participant is on the waiting list, and white when it is possible to speak. The panel connects to the DICENTIS flush base device through an RJ12 control interface and also provides a power and control interface to the DCNM-FMCP. Finished in RAL 9017 Traffic Black, the DCNM-FMICB is supplied as a single unit.

The Bosch DCNM-FEC Flush End Cap is a DICENTIS flush-panel finishing accessory supplied as a set of 50. It is installed on the coupling pieces at both ends of the flush-panel recess to cover cut-out imperfections and create a clean, finished appearance on the left and right sides. Finished in RAL 9017 Traffic Black, each end cap measures 20 × 56 × 5.5 mm.