V Series Zone Audio Platform
Clean power for every zone.
V600:2 2-Channel Power Amplifier
600 W across two channels in a compact half-rack chassis.
V Series Zone Audio Platform
Clean power for every zone.
V600:2 2-Channel Power Amplifier
600 W across two channels in a compact half-rack chassis.
V600:2 One Amplifier,Any Speaker Line.
2-Channel Power Amplifier
600 W total power · 2 independent channels · Full 70V / 100V support
V600:2 One Amplifier,Any Speaker Line.
2-Channel Power Amplifier
600 W total power · 2 independent channels · Full 70V / 100V support
Dynacord V600:2 Power Amplifier
Everything you need to know about this 600W, 2-channel amplifier before specifying it for your project
It powers speaker systems for background music and paging in commercial spaces such as offices, hotels, retail, restaurants, schools and houses of worship. It also handles applications that need higher sound levels, such as meeting rooms and small halls.
Yes. With Variable Load Drive, each channel can run at 4Ω, 8Ω, 70V or 100V in any combination, with no loss of output power. powerTANK can send up to 300W to a single channel when the other needs less.
The amplifier is 1RU high and half a rack wide. The included brackets allow single or side-by-side dual rack mounting, which fits two units in one rack space. It can also be mounted under a counter or used on a tabletop.
Yes. It can be mixed with other V Series models such as the V600:4. It also shares the same side-by-side mounting system as the Dynacord U Series amplifiers.
Yes. The onboard DSP provides input routing, selectable high-pass filters (30/50/100/150 Hz), a 150 Hz low-pass filter and a peak limiter.
Electronic Security Company is the authorized distributor for Bosch, Dynacord and Electro-Voice systems across Pakistan. We supply, design and install commercial audio systems for offices, hotels, retail and auditoriums, with genuine warranty support and after-sales service nationwide.
Compact 600W Power Amplifier for Commercial Installations
The Dynacord V600:2 is a two-channel power amplifier built for background music, announcements and higher-SPL applications in small to mid-sized fixed installations. It suits schools, hotels, restaurants, retail stores and places of worship. It shares the same technology as the four-channel V600:4 in a half-rack chassis.
With powerTANK and Variable Load Drive, the V600:2 shares its 600W between both channels as needed. It can drive low-impedance and 70V/100V speaker lines on either channel without external transformers or wasted power.
Compact 600W Two-Channel Amplifier
600W of total power in a 1RU half-rack chassis, built for BGM, paging and higher-SPL applications.
powerTANK Power Sharing
A shared power reservoir is distributed automatically across both channels, up to 300W on one channel, with no setup needed.
Variable Load Drive (VLD)
Each channel can run 4Ω, 8Ω, 70V or 100V in any combination, with no loss of output power.
ecoRAIL & Auto Power Down:
Reduces idle power use during background music and drops below 1W when no signal is present, lowering running costs.Complete System Integration
Pairs with V Series models such as the V600:4 and mounts side by side with Dynacord U Series amplifiers.
Easy Connectivit
A single RJ45 (AES72-1E) input carries both channels. It also has a 6-pin Euroblock analog input, Euroblock speaker outputs and a Ready/Fault relay.
DualCOOL Silent Operation
Convection cooling in normal use, with a multi-stage fan that switches on only under extreme heat. Ideal for quiet rooms.
Compact Half-Rack Design
The V600:2 measures just 218 × 44.2 × 269.5 mm (W × H × D) and weighs 2.1 kg. It takes up half the width of a single 19" rack unit, so it fits easily into crowded equipment racks, cabinets and counters.
Flexible Mounting Options
Mount it stand-alone in a 19" rack using the supplied short and long rack ears. You can also mount two V600:2 amplifiers side by side in one rack space with the included connecting plate. The supplied brackets also allow tabletop or under-counter installation.
Ventilation & Placement
Airflow runs side-to-rear. Leave at least 60 mm behind the amplifier and 100 mm above the rack for proper ventilation, and keep it away from direct sunlight and heat sources. It operates reliably from -5°C to +45°C.
Ideal Applications for the Dynacord V600:2
| Specification | Value |
|---|---|
| Product | V600:2-EU Power Amplifier, 600W, 2 Channel |
| Amplifier Class | Class D, fixed frequency |
| Number of Channels | 2 |
| Total Rated Output Power | 600 W |
| Power Technology | powerTANK power sharing between channels |
| Load Handling | Variable Load Drive (4 Ω, 8 Ω, 70 V, 100 V, on either channel simultaneously) |
| Signal Processing | Input routing (dual/parallel), HPF 24 dB/oct (100/150 Hz), LPF 24 dB/oct (150 Hz), flat, peak limiter |
Electrical Specifications
| Specification | 4 Ω | 8 Ω | 70 V | 100 V |
|---|---|---|---|---|
| Rated Output Power (per channel) | 300 W | 300 W | 300 W | 300 W |
| Max Output Power per Channel (power sharing) | 500 W | 600 W | 500 W | 600 W |
| Output Voltage at Rated Power | 34.6 VRMS | 49.0 VRMS | 70.7 VRMS | 100 VRMS |
| Maximum Output Voltage | 40.0 VRMS | 56.0 VRMS | 70.7 VRMS | 100 VRMS |
| Rated Impedance per Channel | 4 Ω | 8 Ω | 16.7 Ω | 33.3 Ω |
| Minimum Impedance per Channel | 2.6 Ω | 4 Ω | 10 Ω | 16.7 Ω |
| Nominal Gain (+6 dBu sensitivity) | 27.0 dB | 30.0 dB | 33.2 dB | 36.2 dB |
| Maximum Gain (0 dBu sensitivity) | 33.0 dB | 36.0 dB | 39.2 dB | 42.2 dB |
| Damping Factor | > 75 | > 150 | > 250 | > 500 |
| Signal-to-Noise Ratio (A-weighted) | > 100 dB | > 102 dB | > 101 dB | > 103 dB |
| Output Noise (A-weighted) | < -68 dBu | < -67 dBu | < -62 dBu | < -61 dBu |
| Crosstalk | < -70 dB | < -75 dB | < -90 dB | < -95 dB |
| Specification | Value |
|---|---|
| THD+N (1/8 rated power, 1 kHz) | < 0.1% |
| Frequency Response (-3 dB), 4 Ω / 8 Ω | HP: 30 / 100 / 150 Hz to 20 kHz; LP: 30 Hz to 150 Hz |
| Frequency Response (-3 dB), 70 V / 100 V | HP: 50 / 100 / 150 Hz to 20 kHz; LP: 50 Hz to 150 Hz |
| Power Requirements | 100 V to 240 V AC, 50 Hz to 60 Hz |
| Power Supply Topology | Switching power supply with power factor correction (PFC) |
| Power Consumption (1/8 rated output) | 115 W |
| Idle Mode (ecoRAIL, no input signal) | < 12 W |
| Standby Mode (Auto Power Down active) | < 1 W |
Connectivity
| Specification | Value |
|---|---|
| Analog Audio Input | 6-pin Euroblock (3.81 mm, male), in parallel with 1× RJ45 (AES72-1E) |
| Maximum Input Level (Level 0 dB) | +18 dBu |
| Input Impedance | 20 kΩ, active balanced |
| Loudspeaker Output | 4-pin Euroblock (5.08 mm, female) |
| Mains Input | IEC C14 |
| Control Port | 1× 5-pin Euroblock (3.81 mm, male) |
| Remote On / Standby | Contact input (overrides front-panel power button) |
| Ready / Fault | Galvanically isolated relay, max 30 VDC / 500 mA DC |
| Front Status LEDs | Signal, limit and fault LEDs per channel; power LED |
Mechanical Specifications
| Specification | Value |
|---|---|
| Form Factor | Half of a 19" rack unit, usable on a tabletop or in a rack |
| Dimensions (H × W × D) | 1.74 in × 8.6 in × 10.6 in / 44.2 mm × 218 mm × 269.5 mm |
| Weight | 4.6 lb / 2.1 kg |
| IEC Protection Class | Class I (grounded) |
| Cooling Concept | dualCOOL: convection cooling on a tabletop or in a rack with spacing between units; forced cooling (side to rear) in a rack without spacing or in extreme thermal conditions |
Environmental Specifications
| Specification | Value |
|---|---|
| Ambient Temperature Limits | -5 °C to +45 °C / +23 °F to +113 °F |
| Operating Altitude | -500 m to 5000 m / -1614 ft to 16404 ft |
Protection Features
| Specification | Value |
|---|---|
| Protection Package | Audio limiters, high temperature, DC, HF, short circuit, back-EMF, peak current limiters, inrush current limiters, mains over/under voltage protection |
| Named Protections | HFL, OCL, RSL, HFP, DCP, OCP, MFP, OBP, OTP, OVP |