DICENTIS Flush range
Modular, IP-based conferencing with cost-effective installation convenience
DICENTIS Flush range
Modular, IP-based conferencing with cost-effective installation convenience
Bosch DICENTIS DCNM-FSLP Flush Language Selector Panel
The DICENTIS DCNM-FSLP is a flush-mount language selector panel that lets participants listen to the speaker or interpreter in their preferred language through headphones. It supports up to 100 languages, shown in their native characters, as ISO abbreviations, or as language numbers. That makes it ideal for parliaments, international conferences, and multilingual meeting rooms.
Language selection starts automatically when headphones are plugged in. If a participant has a preferred language set in the system, it's selected for them. Illuminated touch buttons let participants scroll through languages and adjust headphone volume. The display switches off when no headphones are connected or after about 8 seconds without use, saving energy and keeping the meeting room free of distractions.
Premium Flush Language Selector
A slim, flush-mount DICENTIS panel that lets every participant listen in their preferred language during multilingual meetings.
Audio Performance
Frequency Response: 100 Hz – 20 kHz. THD+N: 0.1%. Dynamic Range: 90 dB. Signal-to-Noise: 90 dB. Headphone Output: 65 mW max into 32Ω.
Up to 100 Languages
Languages shown in native characters, ISO abbreviations, or language numbers, so every participant finds their language easily.
Automatic Language Selection
Activates when headphones are plugged in and automatically selects the participant's preferred language if one is set in the system.
1.44" Display with Touch Buttons
A 1.44" LCD with 4 illuminated touch buttons: language selection on the right, headphone volume on the left.
Anti-Feedback Volume Control
Headphone volume is automatically reduced when the participant speaks, preventing acoustic feedback for clear interpretation.
Simple Two-Cable Installation
The DCNM-FSLP connects to the DCNM-FBD2 flush base device with just two cables, both included in the box:
- Control connection (RJ12): The 30 cm RJ12 cable runs from the panel's control port to the DCNM-FBD2. It carries data, power and language information over the DICENTIS system.
- Audio connection (headphone): The headphone connection cable links the panel's headphone port to the DCNM-FBD2's headphone output. It delivers the selected interpretation channel to the participant's headphones.
- Each DCNM-FBD2 supports one DCNM-FSLP per side, so a single base device can serve two participants sitting side by side.
Enhanced User Experience
High-quality loudspeakers and microphones deliver clear audio, even when active together. Shock-mount design reduces noise, while identification secures voting. Language selection is automated for participant convenience.
Easy Integration
Flush modules work seamlessly with DICENTIS tabletop devices and the interpreter desk. Settings are adopted instantly without restart, while the server-based system supports third-party apps, cloud services, and remote maintenance.
Easy, Cost-Effective Installation
The DICENTIS Flush Range offers a modular design for any meeting type. It supports future upgrades, uses existing IP and PoE, and installs quickly with a click-to-fit mechanism. Sharing the Bosch DCN footprint, it allows easy replacement. Dual-seat setups can host up to four delegates, saving space and cost.
Versatile Microphone Options
Compact flush microphones fit where space is limited. The audio interface connects third-party microphones, supports extra inputs, and provides 48 V phantom power.
Structured Meetings
The modular design empowers specifiers and installers to tailor the system to different meeting types. With dual-seat setups supporting up to four delegate positions, meetings can be organized efficiently while saving space and cost.
Convenient Language Selection
Headphone language selection can be automated, ensuring participants quickly access their preferred interpretation channel. Seamless integration with the DICENTIS interpreter desk provides a fully ISO-compliant interpretation solution.
Parliamentary-Style Voting
Identification-based access allows controlled voting functionality, preventing fraud and ensuring accurate results. Voting can be managed directly through the DICENTIS Flush modules for structured decision-making.
Quick Identification
Each participant’s identification enables secure access to system features such as voting and language selection. This ensures smooth authentication and prevents unauthorized use during sessions.
Customize your DICENTIS Flush in wood, stone, metal or RAL color
Match DICENTIS Flush devices to any interior. System integrators, architects and end users can order custom finishes from the RAL Classic and RAL Design color palettes, or choose from a wide range of wood, stone and metal designs.
Lets Talk!
Get in touch for a free consultation, survey, pricing and demonstration session.
Key specs
- 1.44-inch display, 4 touch buttons
- Up to 100 languages, native characters
- Automatic preferred language
- Volume control, 3.5 mm stereo jack
- Headphones 32 ohm min, 65 mW
- RJ12 and headphone link to DCNM-FBD2
- 56 x 100 x 51 mm, 67 g
- Premium license per participant
Specifications: Bosch DICENTIS DCNM-FSLP
General
| Specification | Value |
|---|---|
| Model | DCNM-FSLP |
| Order number | F.01U.402.927 |
| Product type | Flush language selector panel |
| System | DICENTIS Conference System |
Audio
| Specification | Value |
|---|---|
| Frequency response (-3 dB) | 100 Hz – 20 kHz |
| THD+N | 0.1% |
| Dynamic range | 90 dB |
| Signal-to-noise ratio | 90 dB |
Headphones
| Specification | Value |
|---|---|
| Nominal output level | 0 dBV |
| Maximum output level | 3 dBV |
| Minimum impedance | 32 Ω |
| Maximum output power | 65 mW |
| Connector | 3.5 mm stereo jack, plus solder/connector option for an external headphone socket |
User Interface
| Specification | Value |
|---|---|
| Display type | LCD |
| Display size | 1.44 in |
| Controls | 4 illuminated touch buttons (left: headphone volume, right: language selection) |
| Languages | Up to 100 (native characters, ISO abbreviation or language number) |
| Display auto-off | When headphones are disconnected, or after ~8 seconds without use |
Connections
| Specification | Value |
|---|---|
| Control interface | RJ12 to DCNM-FBD2 and other units (CAN) |
| Audio | Via DCNM-FBD2 headphone connection |
| Per base device | 1 DCNM-FSLP per DCNM-FBD2 side |
Electrical
| Specification | Value |
|---|---|
| Power consumption | 0.50 W |
| Operating voltage | 5 V DC |
Mechanical
| Specification | Value |
|---|---|
| Mounting | Snap-fit into a 2 mm metal panel, or with DCN-FCOUP flush coupler and DCNM-FEC end cap |
| Dimensions (H × W × D) | 56 × 100 × 51 mm (2.20 × 3.94 × 2.01 in) |
| Weight | 67 g (0.15 lb) |
| Color | RAL 9017 Traffic Black |
Environmental
| Specification | Value |
|---|---|
| Standard | IEC 60721: storage (1K3), transport (2K2), operation (3K4) |
| Operating temperature | 5°C to 45°C (41°F to 113°F) |
| Storage temperature | -5°C to 45°C (23°F to 113°F) |
| Transport temperature | -30°C to 70°C (-22°F to 158°F) |
| Relative humidity (operating) | 5% – 90%, non-condensing |
Parts Included
| Quantity | Component |
|---|---|
| 1 | DCNM-FSLP flush language selector panel |
| 1 | 30 cm cable |
| 1 | Headphone connection cable |
Know before you buy
Quick answers about the DCNM-FSLP, and how it compares.
How does a participant pick a language?
Plug in the headphones and the display turns on. Scroll through up to 100 languages, shown in native characters, as ISO abbreviations or as numbers, and set the volume with the lit touch buttons. If a preferred language is set for the participant, it is selected automatically.
The display turns off after about 8 seconds without use, and when no headphones are connected. To prevent feedback, the volume is turned down while the participant is speaking.
Does the DCNM-FSLP work on its own?
No. It connects to the DCNM-FBD2 over RJ12 for data and through the FBD2 headphone connection for audio, one FSLP per side of the FBD2. The 30 cm cable and the headphone cable are included. For a language selector without a base device, see the stand-alone DCNM-FSL and FSL2 below.
Which headphones can I use?
Any headphones with a 3.5 mm stereo jack and at least 32 ohm (65 mW output). External headphone sockets can also be connected by soldering or a connector. Bosch headphones for DICENTIS are listed below.
Do DICENTIS Flush panels need a software license?
On the wired DICENTIS system, a Flush seat does basic discussion without a license once the system is registered: microphone, request to speak, loudspeaker, and dual use on the DCNM-FBD2.
These panels need a Premium or Ultimate license for each participant:
Order Premium DCNM-LPP-PE or Ultimate DCNM-LPU-PE, one license per participant; a dual use seat counts as two.
What else do I need for a flush-mounted seat?
A DICENTIS Flush seat is built around the DCNM-FBD2 flush base device, fitted under the table or seat, in an armrest, on a wall or in a cable duct. Pick the panels the seat needs and cable them to the FBD2:
- Microphone: DCNM-FMCP connection panel with a DCNM-MICSLS (310 mm) or DCNM-MICSLL (480 mm) screw-lock microphone, plus a DCNM-FMICB microphone button or DCNM-FPRIOB priority button. The button panel also powers the FMCP.
- Loudspeaker: DCNM-FLSP.
- Language selection: DCNM-FSLP and headphones.
- Voting: DCNM-FVP.
- Identification: DCNM-FIDP with the DCNM-FICH card holder (ask us).
- No space on the table: DCNM-FHHC handheld microphone through a DCNM-FAI flush audio interface (ask us).
In dual use, one FBD2 serves up to four participants, two sharing each microphone and loudspeaker. For mounting, add DCN-FCOUP couplings, DCNM-FEC end caps and DCNM-FPT positioning tools. The FBD2 joins the system with DICENTIS system cables, powered from the DCNM-APS2 or DCNM-PS2.
How are DICENTIS Flush panels mounted?
Every panel clicks into a 2 mm metal panel. In wood or any other surface, fit them with DCN-FCOUP flush couplings and finish both ends of the row with DCNM-FEC end caps (set of 50). DCNM-FPT positioning tools help place the couplings and include a template for the loudspeaker cut-out.
DICENTIS Flush uses the same installation footprint as Bosch DCN Flush devices (except the loudspeaker panel), so an older DCN Flush installation can be replaced without major rework.
Which other DICENTIS Flush parts can ESCO supply?
These are not in our online shop yet. Ask us for a quote:
- DCNM-FIDP identification panel: NFC card reader that reads cards 0 to 1 cm away, so nobody logs in by accident. Up to four per DCNM-FBD2 in dual use.
- DCNM-FICH ID card holder (pack of 25): keeps the card next to the FIDP, so the participant stays logged in while the card is parked and is logged out when it is removed. It takes the place of the end cap on that side.
- DCNM-FAI flush audio interface: connects one third-party microphone or line-level source to the FBD2: balanced or unbalanced, 48 V phantom power, gain 0 to 18 dB, with a contact input for a custom microphone button. It also takes two DCNM-FMCP panels for a rostrum position. The DCNM-FHHC (coiled) and DCNM-FHH (straight 1.5 m cable) handheld microphones connect through it; two FAI give two handhelds per FBD2.
- DCNM-FSL and DCNM-FSL2 flush language selectors: like the DCNM-FSLP, but stand-alone: each connects to a PoE switch with its own network cable, so no FBD2 is needed. The FSL2 can also be daisy-chained.
- DCNM-FET flush extraction tools.
- Headphones: LBB3443/00 and LBB3443/10 lightweight headphones, HDP-LWN neckband headphones and the HDP-ILN induction loop neckband.
Who supplies Bosch DICENTIS in Pakistan, and what warranty do I get?
Electronic Security Company (ESCO) is the only authorized distributor of Bosch, Dynacord and Electro-Voice in Pakistan, so every DICENTIS product is genuine and comes with a 3-year warranty. Warranty is carry-in: bring the unit to an ESCO office and after inspection it is repaired or replaced as needed.
We supply, design and install complete conference and voting systems for parliaments, government offices, boardrooms and auditoriums, with after-sales service nationwide. Prices are quoted per project: tell us your room and number of seats and we will send a quote.