Skip to Content
DCNM-MICSLL DCNM-MICSLL Request a Quote

New!

DCNM-MICSLL

A screw-lock conference microphone on a 480 mm adjustable stem for DICENTIS flush seats. It plugs into the DCNM-FMCP panel and locks with a hand-tightened ring. The long stem reaches people who sit further back or stand to speak. Uni-directional pickup, built-in pop and windshield and a red/green indicator. Scroll down for details.

Rs. 0 Rs. 0

  • Brand - BOSCH
BOSCH
BOSCH

Global leader in Public Address, Voice Evacuation and Conference Systems.

Bosch DICENTIS Flush conference microphones built into a meeting room table with delegates seated

DICENTIS Flush range

Modular, IP-based conferencing with cost-effective installation convenience

Bosch DICENTIS DCNM-MICSLL Screw Lock Long Stem Microphone  ​

The DICENTIS DCNM-MICSLL is a stylish, ergonomically designed conference microphone on a 480 mm adjustable long stem. Its uni-directional response focuses on the speaker’s voice for optimum performance, even in noisy conditions or acoustically challenging rooms such as parliaments, council chambers and large boardrooms.

A built-in pop and windshield reduces breath noise and plosives, and low susceptibility to mobile phone interference keeps meetings free of buzzing and clicks. A red and green illuminator shows when the microphone is live or a request to speak has been accepted. The robust screw-lock connection keeps it firmly fixed to the DCNM-FMCP flush microphone connection panel.


Premium Long Stem Conference Microphone

A stylish, ergonomic DICENTIS microphone on a 480 mm adjustable stem, designed for clear speech in professional meetings.


Audio Performance

Pickup: Uni-directional. Bandwidth: 125 Hz – 15 kHz. Dynamic Range: 100 dB. Nominal Input: 85 dB SPL. Max Input: 115 dB SPL. Equivalent Noise: 15 dB SPL.


Uni-Directional Pickup

Focuses on the speaker’s voice and rejects background noise, for optimum performance in noisy or acoustically challenging rooms.


480 mm Adjustable Long Stem

The long stem brings the microphone closer to the speaker for better pickup in large rooms or when participants sit back from the desk.


Built-In Pop & Windshield

Reduces plosives and breath noise for clean, natural speech without a separate foam windscreen.


Red/Green Speaking Indicator

Red shows the microphone is live, and green shows a request to speak has been accepted, so participants always know their status.

Screw-lock microphone installation Tap the drawing to enlargeClick the drawing to enlarge

Secure Screw-Lock Installation

1

Align the Connector

Line up the alignment key on the microphone connector with the matching notch in the socket of the DCNM-FMCP flush microphone connection panel. The connector fits only one way, which protects the pins from damage.

2

Insert the Microphone

Push the connector plug straight down into the socket until it’s fully seated. Don’t twist the stem while inserting.

3

Tighten the Locking Ring

Turn the knurled screw-lock ring clockwise by hand until it’s firmly fastened. The microphone is now locked in place and can’t be pulled out accidentally.

4

Adjust the Stem

Bend the adjustable stem to position the microphone comfortably toward the speaker’s mouth.

Remove the Microphone

Turn the knurled screw-lock ring counter-clockwise by hand until it’s loose, then pull the microphone straight out of the socket.

DCNM_MICSLL_Data_sheet_enUS_91252420619.pdf
Download

Key specs

  • Uni-directional, 125 Hz to 15 kHz
  • 480 mm adjustable stem, 108 g
  • Screw lock, fits the DCNM-FMCP flush panel
  • Max input 115 dB SPL, noise 15 dB SPL
  • Dynamic range 100 dB
  • Built-in pop and windshield
  • Red/green speaking indicator
  • 5 VDC, 0.10 W, traffic black

Specifications

General

SpecificationValue
ModelDCNM-MICSLL
Order numberF.01U.392.960
Product typeScrew lock long stem microphone
SystemDICENTIS Conference System

Audio

SpecificationValue
Pickup patternUni-directional
Bandwidth125 Hz – 15 kHz
Dynamic range100 dB
Nominal acoustic input level85 dB SPL
Maximum acoustic input level115 dB SPL
Equivalent noise15 dB SPL

Electrical

SpecificationValue
Power supply5 V DC
Power consumption0.10 W

Controls & Connections

SpecificationValue
IndicatorRed (microphone active) / Green (request to speak accepted)
ConnectorPlug-in, screw-locked

Mechanical

SpecificationValue
Stem length480 mm (19.90 in)
Connector dimensions (Ø × H)15.9 × 41.3 mm (0.63 × 1.63 in)
Weight108 g (0.24 lb)
ColorRAL 9017 Traffic Black

Environmental

SpecificationValue
StandardIEC 60721: storage (1K3), transport (2K2), operation (3K4)
Operating temperature5°C to 45°C (41°F to 113°F)
Storage temperature-5°C to 45°C (23°F to 113°F)
Transport temperature-30°C to 70°C (-22°F to 158°F)
Relative humidity (operating)5% – 90%, non-condensing

Regulatory

RegionMarks
EuropeCE
Great BritainUKCA

Parts Included

QuantityComponent
1DCNM-MICSLL screw lock long stem microphone
Questions & answers

Know before you buy

Quick answers about the DCNM-MICSLL, and how it compares.

Where is the DCNM-MICSLL used?

In flush-mounted DICENTIS seats, where the conference equipment is built into the desk instead of standing on it: council chambers, parliaments, courtrooms and auditoriums with a clean, fixed look. It plugs into a DCNM-FMCP panel set into the desk. The 480 mm stem reaches participants who sit further back or stand to speak.

Short or long stem: which one should I choose?
TypeShort stem, 310 mmLong stem, 480 mm
Click lock, tabletop and WirelessDCNM-MICSDCNM-MICL
Screw lock, flush seatsDCNM-MICSLSDCNM-MICSLL
Screw lock, cardioidDCNM-MICSCDCNM-MICLC
Screw lock, wide cardioidDCNM-MICSWCDCNM-MICLWC

In each pair only the stem differs, the sound is the same. The short stem suits participants seated close to the desk and keeps sightlines clear. The long stem reaches people who sit further back or stand to speak.

DCNM-MICSLL or DCNM-MICL?

They fit different equipment, so one cannot replace the other. The DCNM-MICL has a click-lock plug for tabletop DICENTIS units (DCNM-D, DE, DVT, DSL) and the IDESK interpreter desks. The DCNM-MICSLL has a screw-lock plug for flush seats, through the DCNM-FMCP panel. Choose by the equipment you are installing.

Will it work in a noisy or echoey room?

Yes. Bosch designed the DICENTIS stem microphones for acoustically challenging rooms: the directional pickup focuses on the speaker, the built-in plop and windshield cuts breath noise, and they have low susceptibility to mobile phones, so no buzzing when a phone is on the desk.

Which DICENTIS microphone fits which device?
MicrophonePlugWorks with
DCNM-MICS / DCNM-MICLClick lockTabletop DCNM-D, DE, DVT, DSL, DCNM-IDESK, IDESKVID, and Wireless DCNM-WD / WDE
DCNM-HDMICClick lockTabletop DCNM-D, DE, DVT, DSL, and Wireless DCNM-WD / WDE
DCNM-MICSLS / DCNM-MICSLLScrew lockFlush seats: DCNM-FBD2, through the DCNM-FMCP panel
DCNM-MICSC / DCNM-MICLC cardioid
DCNM-MICSWC / DCNM-MICLWC wide cardioid
Screw lock, 12-pinDCNM-MMFF and DCNM-MMDOCK
DCNM-FHH / DCNM-FHHC handheld5 m cableFlush seats: DCNM-FBD2, through the DCNM-FAI audio interface

The click-lock and screw-lock plugs are different, so a microphone only fits the devices in its row. Send us your device list and we will match the microphones.

What else do I need for a flush-mounted seat?

A DICENTIS Flush seat is built around the DCNM-FBD2 flush base device, fitted under the table or seat, in an armrest, on a wall or in a cable duct. Pick the panels the seat needs and cable them to the FBD2:

  • Microphone: DCNM-FMCP connection panel with a DCNM-MICSLS (310 mm) or DCNM-MICSLL (480 mm) screw-lock microphone, plus a DCNM-FMICB microphone button or DCNM-FPRIOB priority button. The button panel also powers the FMCP.
  • Loudspeaker: DCNM-FLSP.
  • Language selection: DCNM-FSLP and headphones.
  • Voting: DCNM-FVP.
  • Identification: DCNM-FIDP with the DCNM-FICH card holder (ask us).
  • No space on the table: DCNM-FHHC handheld microphone through a DCNM-FAI flush audio interface (ask us).

In dual use, one FBD2 serves up to four participants, two sharing each microphone and loudspeaker. For mounting, add DCN-FCOUP couplings, DCNM-FEC end caps and DCNM-FPT positioning tools. The FBD2 joins the system with DICENTIS system cables, powered from the DCNM-APS2 or DCNM-PS2.

Why choose a screw-lock microphone?

A knurled ring screws the microphone onto its panel by hand, with no tools. Once tightened it cannot be pulled out or knocked loose, which suits permanent installations such as council chambers, parliaments and public meeting rooms. To remove it, unscrew the ring and lift the microphone straight out.

What do the red and green lights mean?

The light on the microphone head shows your status: red means the microphone is on and you are live; green means your request to speak has been accepted and you are next.

Who supplies Bosch DICENTIS in Pakistan, and what warranty do I get?

Electronic Security Company (ESCO) is the only authorized distributor of Bosch, Dynacord and Electro-Voice in Pakistan, so every DICENTIS product is genuine and comes with a 3-year warranty. Warranty is carry-in: bring the unit to an ESCO office and after inspection it is repaired or replaced as needed.

We supply, design and install complete conference and voting systems for parliaments, government offices, boardrooms and auditoriums, with after-sales service nationwide. Prices are quoted per project: tell us your room and number of seats and we will send a quote.

Similar Products
Accessory Products